Your cart is empty.
Your cart is empty.Get that off-road look with Rugged Ridge Body Armor. Each Body Armor piece is constructed of black diamond plate UV treated thermoplastic for the coolest, toughest looking upgrade for your Jeep. Each body Armor attaches to your Jeep with ultra strong 3M tape to ensure a secure fit. Have a scratch or dent on your paint? Cover it up paint (to prevent rust) and install the Body Armor. You have now repaired and upgraded!
Steven Brantley
2025-08-19 10:59:17
After hitting some ice and tearing up my front fender I decided to buy these to cover the damage. They worked great and fit like a glove. No sweat on the tape... I just used clear silicone via caulk gun to attach. Nothing to it. One thing to note... these attach behind the front running lights via screws. In other words, you remove your front running lights, then replace atop the fender covers back to the holes. The screws in the kit were just a little short and not really up to the task. I went to the auto store and purchased some stainless #8 screws with plenty of length to tighten up everything.These look great on the jeep. I also have real diamond plate installed and the guards matches just fine!
A.R. Jones III
2025-08-11 10:12:11
I like these. No reason they are priced like they are. I’ve seen disposable packaging that has to be on equal with this product. No idea why they cost so much. That being said I like them. I have a lot of fender damage and this is less expensive that collision repair. Covers chips and dings. Protects metal fender. I like but think the price is ridiculous.
Whatchamacallit
2025-07-27 11:05:02
Had to go to town and purchase longer screws. 4 ea. Did not use adhesive strip because product will yrap dirt, mud ect behind them and I wanted to b able to remove when needed for cleaning.
Paul donnelly
2025-07-21 12:14:23
Don’t fit at all without cutting and even after that it fits so poorly you need to but extra long screws for the blinker which is all that holds it on really since the adhesive tape won’t stick because the poor fit what a waste of money
M. Osterhous
2025-07-07 16:01:18
Easy to instal and looks great
tammy
2025-06-25 19:26:39
It looks great, but I wish the plastic would have been a bit thicker. The driver side cover needed extra adhesive because the top left side pops up due to slight warping. It's nothing that couldn't be fixed and the end result looks good, It was a breeze to attach.
Gary R Mileski
2025-06-22 09:21:48
As others have mentioned, I had to use a heat gun to form it a little better on the top outer edges on both sides… did not sit flush. That said, they do what they are supposed to do. Good news is that it also covers up the rust spots that develop in the top front of the fenders
tom
2025-05-30 14:24:08
Good value for money. Looks good on jeep.
Robert
2025-02-27 14:34:54
perfect fit and received in under 24hrs, did not even know i could get stuff for my jeep on amazon, my other a wheel parts store takes forever and is much more expensive
カスタマー
2025-01-28 16:19:13
ãƒãƒ³ä»˜ã‘出æ¥ã‚‹ã‹ã¨æ€ã£ã¦ã„ãŸã®ã§ã™ãŒã€ãƒ•ェンダーå´ã‚’å°‘ã—削らãªã„ã¨å–り付ã‘ã§ãã¾ã›ã‚“ã§ã—ãŸã€‚
Driller man
2025-01-20 16:37:57
Fit well
SMW
2025-01-06 12:53:52
I bought this fully expecting to return it, based on the negative views I read on Amazon. Mine fitted nicely, requiring only a small amount of work to fit excellently. The adhesive works really well but I had thoroughly cleaned the surface of the Jeep with first Windex then 99% isopropyl alcohol. Then I wiped the area clean with a lint cloth, then applied the fender guards. It helps to do a dry run first to be aware of any tricky spots.The second picture shows where I had to warm up the plastic with a heat gun, it didn't quite match the curve of the fender. I lightly heated it and then pressed it carefully to match and fit. All in all it went on without much trouble. There are four longer screws included in the kit to install the turn signals, these went in without fuss.I like the look of the fender guards, and I am happy with my purchase.
Recommended Products