Your cart is empty.
Your cart is empty.Graphite impregnated gaskets resist abrasion, creosote adhesion and temperatures up to 1000 F degrees. Great as replacement for worn out gaskets in wood and coal stoves or fireplace inserts.
arthur curren
2025-08-29 15:48:48
The graphite rope seals better than the gasket without. Tried 5/8 inch but just didn't hold the seal. Wood burned too fast during the night. Get the good stuff, save some wood and be able to stay in bed a little longer on the cold nights.
Customer
2025-08-28 11:01:24
fit good.
Gary DZ
2025-08-18 21:36:21
My stove called for a 5/8 inch gasket. Based on reviews on Amazon--several people recommended getting a size bigger.I ordered this, which is 1/5 of an inch bigger.I could not close my door tight with this gasket. I ended up ordering a 5/8" and it worked fine.Still giving it a 5-star.Lesson Learned.... Order the correct size.The product is well made. Easy to cut to length. Dense material that compresses, but not collapses.
Nathan Stock
2025-08-17 15:54:35
Arrived promptly and does the job as needed, easy to install provides great seal for the refurbished wood burning stove install.
Eric Pohl
2025-07-04 16:33:57
This 3/4" rope gasket worked great, I needed 5/8 but got the bigger and it still worked great .
Dingo 883
2025-06-24 16:46:08
Pretty easy to install. Wish I had gotten the size up. Underestimated the size I needed but it works. Definitely buy it again, just bigger one.
Leeann & Gene
2025-06-03 17:26:18
Looks and works around the wood burning free standing fire box door, I got it to long and to wide, needed wood stove glue too, Need to buy a smaller size so door can close all the way.. My mistake.. Thanks..
Dobbin Burkhart
2025-05-04 11:36:21
I cant tell if my problem was with Rutland's gaskets being undersized or my stove mfr (US Stove) specs. According to the owner's manual for my stove, my door gasket was supposed to be 5/8ths inch. When I ordered that size, the door leaked big time. Ordering a size up (3/4") seemed to fixe the problem but I had a very difficult time getting the bigger size to stay in the groove. Once it stayed in place long enough to close the door, a real hot fire caused the gasket to settle in nicely.
Jake
2025-04-24 11:50:48
This was for my RSF fireplace the Opel AP. It was difficult to find the actual size for this fireplace despite having the manual. This part fits the door edge seal. I cut this length in half and it fit the two doors perfectly. Note I also need a length of 1/4" to 5/16" for the overlap on the doors, which I ordered at the same time.I did compress the gasket lengthwise before gluing. Compression has the effect of increasing the diameter. I found having more gasket material is better than not enough and the door bottoming out. It will also flatten out over time. And the door handle is designed with a wedge on the lever so you can get a good seal.Since the material is fiberglass-like it tends to fray easily. I saw a tip about taping the end while installing and gluing. I'll try that next time. You could also glue the end beforehand.To remove the old cement/glue I used a wire-wheel on my cordless drill. Only took 5 minutes.
Tammy Drombolis
2025-02-23 14:27:19
Great product!
David Scoffield
2024-12-22 09:17:31
It does what it is supposed to and it's reasonably priced.
Dan The Man
2024-12-05 15:08:22
This heat guard rope is the perfect fit and it's very nice install.
Terry Serson
2024-12-04 13:49:49
Fast delivery and as described! Would buy again!
Recommended Products
