Shopping Cart

Your cart is empty.

Your cart is empty.

Serene Valley Sink Grid 18-1/8' L x 13-3/8' W, Centered Drain with Corner Radius 3-1/2', NDG1813C

Free shipping on orders over $29.99

$39.95

$ 20 .99 $20.99

In Stock

About this item

  • IMPORTANT NOTICE: The VIDEO on the product picture display shows you how to measure our sink to find a matching grid. It takes you 2 minutes to watch but potentially save you a lot of time and trouble if ordering a wrong grid can be avoided. If you are not sure how to measure your sink to match our grid, please contact us by email or message, we will respond to you in 12 hrs to help you.
  • Grid dimension: 18-1/8" X 13-3/8" for your sink bottom with Corner Radius 3-1/2"
  • Center Drain LOCATION
  • 304 Premium stainless steel construction with light weight design to ensure durability and user-friendliness at the same time.
  • Please refer to the video shown at the bottom of the product picture display for more detailed info on measuring your sink to fit our grid. This info is VERY important and could save you a lot of time if ordering a wrong grid can be avoided.



Product Description

sink protector

Serene Valley Brand aims to making a kitchen grid to be a beautiful addition to your kitchen without compromises. We use the 1/4”diameter 304 stainless steel for the outer wire and 1/8" for inner wire, which is thicker than most of competitors. Our tighter grid structure and unmatched laser welding technique all make it stand out from the crowd. A good product speaks for itself. Once you have it in hand, you can feel the quality and have no regret for the purchase.

How to Measure Your Sink to Find the Matching Grid?

sink grid

Where The Grid Sits?

Our sink protector have 1" height, which means it sits at the plane about 1" above the sink bottom. Therefore, it's VERY important to measure the dimension of your sink bottom at 1" height.

sink metal protector

Sink Bottom Length

Measure carefully from left to right at the plane about 1" above the sink bottom. Please make sure the length of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

stainless steel sink grid

Sink Bottom Width

Measure carefully from top down at the plane about 1" above the sink bottom. Please make sure the width of the grid of your choice has about 1/2" less than your measurement, which is to avoid the grid edge touching your sink.

stainless steel bottom grid

Kitchen sink, in general, have three types of drain location: centered drain, rear drain and side drain (or side corner drain). Please make sure the grid of your choice have the same drain location as the grid you choose.

kitchen sink protector

Kitchen sinks have different corner radius. Please make sure the grid of your choice have the same corner radius as the grid you choose.

stainless steel sink protector

Extra Solid Material

Serene Valley uses the highest standard when it comes to making kitchen bottom grids. The extra thick 1/4”diameter 304 stainless steel is used for the outer wire and 1/8" is for inner wire. The heavy duty 1x1" grid structuret won't flex and yield, no matter how heavy load you put it on.


BonnieSF
July 31, 2025
This sink rack is quite sturdy, hasn't rusted, and it's as described. Good product
JessieAy
July 29, 2025
This grate fits our Elkay sink perfectly! We had ordered one Elkay sink from Amazon for one of our houses and I came with a grate, which we thought was a “grate” idea to keep the bottom of the sink from scratching. The second sink I bought did not include a grate and I had a bit of difficulty finding one that would fit. Anyway, this fits and is heavy gauge and solidly constructed. It came with black bumpers on it, but also a little baggy of clear ones in case you prefer that aesthetic. I left the black on assuming they’d stay looking less grody.These are more expensive than I expected, but it looks really good and I’m happy with it.
DonnaS
July 12, 2025
this is the third one that I ordered, having to send the other two back. I have an older sink from the 90's, the first two were the right length but the wrong width. When I first looked at it on Amazon I was unsure because it has rubber slip-on feet, which made me think about bacteria build up... but it was the right size so I ordered it. To my surprise it arrived with an additional two sets of rubber feet that slip on and off, so when your bacteria tolerance has been hit you can just change out the feet for a new set! I love it, it's very secure, durable and steady in the sink, it doesn't move even with heavy pots.
M. Jimenez
June 25, 2025
Just make sure to take the right measurements and pay attention to where the drain in your sink is.
Ryan
June 17, 2025
Bought this sink grid in July 2021 and it's worked great since day 1. No structural issues or any signs of rust. Rubber tips are still fully intact. The grid is heavy enough to feel sturdy but never an issue to take out to clean. It isn't easy to fit in a dishwasher but has withstood many hot washes without issue.I also appreciate that it is still listed for the same price I paid 3 years ago.
Rosie
May 30, 2025
Love it! Fits perfectly, does its job. Quality is great and Sturdy.
BecsFL
March 24, 2025
Had to return this. Well made but had to return as it would not fit.
Samantha
March 16, 2025
This is my second purchase. I loved mine so much I bought one for my parents. It’s a Great fit, very sturdy and protects my sink from scratches and dings. Strong enough that I can safely wash my cast irons in the sink with no more worries of damaging my sink.
lou
January 30, 2025
La seule chose j’aurais aimé savoir que cela était livré par la poste