Your cart is empty.
Your cart is empty.Product Description
MATERIAL
- Made of REAL wood, the pre-glued plywood edge banding is easy to process and durable.
- Wooden veneer is flexible with smooth cut surface, good paint and gluing performance.
- Convenient to iron onto the required surface.
MULTIPLE CHOICES
WOOD TYPES:
- Birch；Maple；Cherry；Red oak ; Walnut
SIZE:
- 3/4"×50' ; 13/16"×50' ; 7/8"×50' ; 2"×50'
- 3/4"×200' ; 13/16"×200' ; 7/8"×200'
- 3/4"*250' ; 13/16"*250' ; 7/8"*250' ;
EASY TO APPLY
The wood veneer edge banding is nice-touched and easy to cut, apply and stain. Simply use household iron, hairdryer with hot wind or edge banding machine to attach. Trimming and sanding as required after the glue turning dry.
Scott Hanson
2025-09-04 16:02:36
easy installation
Nancy
2025-08-11 13:35:08
Easy to iron on. Used cotton setting on our iron. Sticks well. Stained really well. Really dressed up a nice piece of plywood that we made a table for our camper.
Bruno L. Klein
2025-07-21 17:43:42
I think the product has a good quality, but it is not so easy to adhere to the material. I used plywood. Just heating with the iron wasn’t enough to adhere. I had to pass the iron to melt the glue and then use a wooden piece to make pressure against the plywood. To finish it I used a utility knife and sanded it. I would buy it again, I think it is worth the price.
Dovely
2025-07-15 11:57:01
I had a really weird threshold I needed to fill and cover- it had to be super thin for our doors to close. I got this and it's held up really well, even with the foot traffic! With the hot gun, this was a breeze to install.
Matt Giacomini
2025-07-04 18:00:03
If you didn't mind spending more money, then this is a 4 star product, but factoring in the price this product is surprising good.I will say make sure to get the glue hot, like almost too hot to touch. In my first try I ironed a little to quickly and had some separation. I was able to fix by just re-ironing the product. After that I was careful to slowly iron and get everything good and hot, and had no issues with separation.
ZigityZig
2025-05-24 15:29:32
Product it self is great, adheres well etc. however it is not 50’ only 42’. That’s an 8 foot difference and I can’t retiren since I already started using. Next time will have to measure the product to make sure I’m not short changed.
VA Woman
2025-05-19 15:56:40
This was my first use of this, didn’t know it existed until I looked for it. Perfect, exactly what I was looking for. Felt kinda weird using my iron on the side of a board but it worked! Gave my shelf a finished look, very professional.
Mr. Burch
2025-05-16 10:06:41
I have use edge banding for years and this problem I had was a first. Glue worked perfect edging stayed put once heated but I continually had to start over because about 25 % or more of the roll were shorter prices overlapped and glued together. That meant of course pulling off the shorter strip and starting over or slicing the strip and having a seam right in the middle of my wood. It was not one continuous strip. I liked the product but this was deceiving. I would not recommend this product.
Diane J Burke
2025-05-13 14:16:09
This edge banding worked well on our kitchen cabinets when we replaced the countertops. We used it to cover up the melamine which was left showing after the countertops no longer had the overhang edge that originally hid the melamine. The colour was a little lighter than our cabinets so we rubbed the Veneer with pecan coloured stain and it worked beautifully.
Mike Mercury
2025-04-22 20:13:06
This is real wood with hotmelt adhesive on the back. Haven't stained it yet, can't address that, but I'm confident it's going to be fine - it's thick. I plan on buying more.
Vedius
2025-04-09 12:02:48
Goes on ok. A bit thin so it will break fairly easy when working with it. Make sure to have it against a very firm surface (no bumps or gaps) and be sure to give it a protective coating (stain, butcher block oils, and/or clear coat) so that it can strengthen up a bit.If it were thicker I'd give more stars as it is a very beautiful edge piece.
Tyrone
2025-03-14 18:20:02
Works as expected. Ironed on nice. No complaints, will buy again.
mark.leites
2025-02-19 10:15:15
Superb quality, minium joints,presanded, highly recommend
Recommended Products