Your cart is empty.
Your cart is empty.The 10” dual bevel sliding miter saw is powered by a 15-Amp motor that drives 4,800 RPM, delivering extended power and durability. This miter saw features a horizontal grip handle with a center located safety trigger for left- or right-handed use. The 9 detents on the stainless-steel miter plate and 11 miter locations allows for 50-degree cuts left or right, with 11 positive stop positions at commonly used angles. The tool comes equipped with a cam miter lock knob for repeatable accuracy, durability, and easy adjustments, while the tall sliding fences support 4-1/2” base molding vertically, and 6-1/4” crown molding vertically nested. The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability. The quick work clamp quickly secures materials for safer cutting.
John K Ellison
2025-08-15 20:30:54
I‘ve wanted to buy a nice power miter saw for many years. I finally decided to do it and researched the various brands and types. I settled on this compound miter saw from Skil Saw after carefully weighing the features and reviews against the competition. I believe I made the best choice. It is a very sturdy piece of equipment with great features. The engineering shows a lot of careful planning. Controls and adjustments are conveniently and safely located. Operation is very intuitive and since I’m a beginner, I really appreciate this. I‘ve used it several times for simple cuts and so far, I couldn’t be more pleased. I feel confident cutting with it by following the instructions carefully. The cuts are precise and accurate. If I had to find a fault, it would be that it is kind of messy. The collection bag doesn‘t seem to collect much of the saw dust while cutting and it ends up all over the machine. Maybe I’m doing something wrong, but clean up isn‘t that difficult. The price was super good and I bought it as a package with a nice stand that seems custom made for mounting this saw. I look forward to many years of reliable service from this saw. Skill has earned by trust.
Clayton
2025-08-06 12:37:49
I read lots of reviews before getting a compound miter saw and ultimately settled on this one because, time and time again, the reviewer mentioned it was a great value for your money.After using it for a few years I can say but I whole-heartedly agree! I've used this saw for a wide range of projects: framing the entirety of our enclosed and air conditioned 150 ft² shed, doing trim work around the house, and seemingly everything in between. I've had no issues with degradation of materials or cut quality, and it has consistently and easily cut everything I've thrown at it, all the way up to treated 2x10s.Great saw and I would absolutely buy it again.
KGeorge
2025-07-31 14:31:09
This thing is FANTASTIC. Its 15-amp motor delivers up to 4,800 RPM, allowing for quick and detailed cuts. The dual bevel feature enables cuts at 48° and 45° to the left, and 0° and 45° to the right, with four positive stop positions, providing versatility for various cutting needs. It came accurate out of the box, no adjustment was needed (however it’s always recommended to check and make sure it’s properly adjusted). The shadow line is sweet and a welcome addition at this price. I recommend a miter saw stand for it, but you can get by using it on a desk if necessary.Overall though, this miter saw is a reliable and efficient choice for both professionals and DIY enthusiasts.
Dogmom328
2025-07-29 16:37:02
I will come back later and leave a review once I use it. BUT my old miter saw is a 10 inch Ryobi. Very small...and lightweight. Easy for this old gal to carry in and out of storage but it had all kinds of things wrong with it. Never got straight cuts from it..locking handles broke. It was a mess. So I bought this due to the price and everything it offered, I wanted. Well I got it shipped to me and DANG..its VERY heavy and VERY big. I was not expecting that at all.I waited to have help to move it. In the meantime, I built a solid wood table to sit inside of a small metal shed. Bought shed just for the saw. Sigh. Anyway...built heavy wood table to fit...drilled holes into table and bolted saw to table. It aint going nowhere now. BUT the shed being small..i knew a 2x4x8 wouldnt fit in the shed..soooo I cut a hole in the side of the building to be able to run a board out the side...then i covered the hole with a rubber type flap. I have not used the saw yet since its only been a week...but it looks big and scary. LOL I am use to using small tools. I still need to learn to use it but it looks pretty simple. I will update once I have used it...but I am happy with my purchase so far. The shed..thats another story. UGH.I can say one thing..this will be alot better for cutting small plywood type projects or 2x6 or larger boards. I dont like using hand saws. I can never get a straight cut. My hands arent that strong to hold on like that. Maybe I needed a table saw too. Thats next and sawhorses. For yrs I have used crappy plastic cheap sawhorses that fall down on me all the time and no place to cut. an uneven yard is the best i have.But I am excited to finally have something descent to use...as i said..i will update once i have used it for a project.UPDATE: Have cut a few boards and used the bevel also....works very well. I like it. Still learning all the knobs but it is good. I am happy with it. (I added pics)
Jason
2025-07-10 19:19:37
I've had this saw for six months now and I don't regret the purchase. The action on the saw is smooth. The miter is accurate and easy and quick to adjust.Minor quibble: the set screw that keeps the slide mechanism from working for transport doesn't work very well. You have to crank down on it pretty good.More than minor quibble: the laser shadow line is a great feature if you can see it. Even setting the saw up indoors to do trim work I sometimes have a tough time seeing the shadow line if the ambient light is bright. I've had the saw set up outdoors and I couldn't see the shadow line at all. If the LED's casting the shadow had a few more lumens output that would help. I may open the thing up and see if I can solder in some stronger LED's because the shadow line is a great feature.
JohnPlemons
2025-06-09 16:21:38
I love the ease of operation and how well it makes beautiful clean cuts. The unit is well made and works flawlessly. Smooth operation and easy to make any project look profesional.The degree's are marked and detents lock in at the most common angles. Bang for buck it can't be beat, it has all of the important features you want and need, and glides effortlessly through most pieces of wood. I have been using mine lately for composite decking material and each cut is smooth and slag free, just like a hot knife going through butter it does the job.
Dwight hicks
2025-06-05 12:03:18
This is my first Mitre saw, after much work on others. It works very well, with lots of power for all types of material. Out of the box, not much adjustments were needed, but calibration is easy
Omar Bravo
2025-05-09 15:29:45
Es una sierra profesional, muy completa, cortes excelentes y precisos maneja infinidad de ángulos!!! Vale su calidad por el precio!!!
Gabriel
2025-04-16 11:52:47
I love my new saw. Amazing to use makes the Job fun by using it!
Dani
2025-03-24 11:02:17
Los cortes son precisos la verdad por el valor un 10, por q compite con herramientas del doble de precio
Sergei T
2025-01-31 18:37:52
This was an upgrade from not-so-brand name miter saw. I like the idea of using a bright LED light vs "laser" like lights. It produces a fairly precise cut out of the box.
Recommended Products
$399.00
$ 99 .00 $99.00