Your cart is empty.
Your cart is empty.Product Description
Lever Wire Connectors
Which can connect multiple sets of wires, freeing up a good amount of spacea and times,
They are compact, super easy, reliable and reusable.
Connector wiring demonstration
Strip off the wire casing with a length of 10mm
Press 1 to plug in for two seconds for wiring
Open the handles of the connectors in sequence and insert the wires into the inlet port
Press the handle down to complete the installation
Insert an electric pen into the test hole on the top of the terminal to test the circuit
-
Insulated flame-retardant shell
Made of nylon PA66, which is flame retardant and temperature resistant.
-
Test hole design
Visual inspection of whether the wire diameter meets the standard: Terminates 28-12 AWG
-
The wires are tightly clamped
Built in stainless steel clamp spring design, ensuring stable wire clamping
-
performance
Rated Voltage: 250V/4KV; Rated Current: 32A
They work with most every gauge of normal household wiring
Suitable for places such as shopping malls, bedrooms, homes, offices, hotels
100 Lever Wire Connectors
Product comparison
100 | Packaging quantity | 65 |
2ports+3ports | Model | 2ports+3ports+5ports |
Whether boxed or not | |
100 | Packaging quantity | 45 |
2ports+3ports | Model | 2ports+3ports+5ports |
Whether boxed or not | |
100 | Packaging quantity | 75 |
2ports+3ports | Model | 2ports+3ports+5ports |
Whether boxed or not | |
100 | Packaging quantity | 198 |
2ports+3ports | Model | 2/3/4/5ports |
Whether boxed or not | |
- 65 Lever Wire Connectors
- 45 Lever Wire Connectors
- 75 Lever Wire Connectors
- 88 Lever Wire Connectors
Garrett G.
August 27, 2025
Have not had any fail on me yet. I always do a pull test on the wires to make sure they are seated good. work great when joining stranded to solid conductors. Also makes it nice when trying to wire heavy fixtures one handed while holding the fixture up. Have not used these on any heavy power usage circuits like bathrooms or kitchens but they work great for lighting circuits and control wiring.
mattchew
June 29, 2025
Easy to use
Joseph Sansevero
May 26, 2025
They are very easy to use and hold larger 12 wires great. Been using to convert florescent bulb fixtures to ballast bypass in my church. Have uses about 50 of the 3s and 2s and 3-3s. They are all about the same a little bulky and work well in larger spaces like inside a light fixture. Have used in a few outlets and in a few other places etc. They work great with larger solid wire. But not as well in thinner wire with stranded. 14 GA solid seems ok but 14-16 stranded seems loose and may pull out. Otherwise they work awesome in the places with more room and solid thicker wire. Be wary to use in outlets with many wires may take up to much room. But still work well if only a few wires.
steve lott
May 24, 2025
I just started using these. I am doing some remodeling. They are wonderful. Highly recommend
Chuck B.
May 10, 2025
These work great for joining stranded or solid wire. I used mine to attach porch light fixture stranded wire to the wiring in the junction box. If I ever need to remove the light fixture, I can simply open the lever for each wire and I'm done. I hate wire nuts and will not be using them in the future.
Zene Malinski
April 8, 2025
This really speeds up any job. Lock down tight and no worries.
keith sikes
March 3, 2025
work good for me and my family
Joshua Lee Briggs
February 12, 2025
Most of them work but some broke when trying to use.
Recommended Products