Your cart is empty.
Your cart is empty.Product Description
SpeTool TiAIN Coated Tapered End Mill
Industrial Quality
Made of premium carbide according to strict industrial grade quality standards with high wear resistance and has long service life to ensure best performance
TiAIN Coating
TiAIN Coating offers high resistance to heat and oxidation and allows faster cutting speeds,increase longer service life
Sharp Cutting Edge
Sharp edge ensure good cutting effect,clean surface,no burr for excellent cutting finishing
Available Materials
- Wood
- Aluminum
- Copper
- Acrylic
- Plywood
- Carbon steel
Customer
August 19, 2025
I had been trying to do some fine engraving in brass using 0.1mm tip flat grind engravers, and struggling mightily. Even though these tools have a bigger tip, I re-worked my design to accommodate the size difference and what an amazing difference. These are cutting much better, and LASTING. After a few test cuts the tip looks perfect at 40x macro. The old point engravers would lose their tip almost immediately. These having two flutes helps to. As long as my design and handle the larger size, I'm glad I switched. Running at 24k rpm, 0.25mm depth of cut, .5mm width of cut.
Alec Marshall
August 2, 2025
These worked great for engraving brass and aluminum for a set of wax seal stamps I was making! I used Vcarve to generate toolpaths but these little mills can do surprisingly fast. For feeds and speeds I had 10 IPM and 0.01 DOC in both aluminum and brass and I never broke the cutter (in about 2.5 hours of machining).
Paul J. Sgrillo
July 31, 2025
These bits do a very nice job rendering the fine detail on the images and bas reliefs I do on my cnc machine. The seem very sharp and for the price are excellent.
Dan
July 24, 2025
I bought a 5-pack of these bits for $20, not expecting much. The first bit held up really well through a 10 hour hardwood (cherry) 3D carve. Still sharp afterward. I used the same but as an end mill to cut out some laser cutting design from 1/8" plywood. The bit is still sharp. If the other 4 bits in the pack hold up this well, they're a steal at $20.
shad
July 19, 2025
I do alot of 3d cnc milling on walnut. This bits are sharp and last along time. They leave a amooth finish and get into thoughts hard to get spots. Ive tried some other brands and these are the best I have found so far
Nazareth
July 19, 2025
This is a profile I cut out of siren head and attached to a chest I build for my son's girlfriend's son. I was able to use this to clear out the sharp angles and even clear the skinny area above the R and B in the name. Feed rate of 640 mm/min, stepover 20%, and RPM of 18000. Hope this helps.
Satisfied customer
July 17, 2025
Cut well and shed chips well. Seems pretty tough for a small bit. I was able to run it faster that end mills of similar size. I was using it on hard plastic for nametags and oak, hickory and walnut for inlays and engraving.
CSW
July 13, 2025
Expected a bit this give to break during a long 3d vcarve finish pass. But, handled two long runs with great results
NILESH D.
July 5, 2025
The media could not be loaded.
PROTO Industrial
June 8, 2025
Con estas pequeñas herramientas de grabado me apoyo para marcar y grabar bases de acero 1018, 12L14 y de aluminio. Trabajan excelentemente y duran 20 veces más que un cortador vertical de carburo del mismo dÃmetro. 18,000 rpm, lubricación y avances de 200mm/min X 0.125mm (0.005") de corte por pasada y durarán muchÃsimo
Eldar Gerfanov
June 5, 2025
The grind seems to be good, but the tip diameter is actually 2.2mm. It is OK for my use and could be just my batch, but do make sure you measure them before using.
Kevin
May 23, 2025
I am very impressed with the detail that can be cut with one of these. They are far stronger than my 1/16th inch bits and yet the point tapers down to about half that size. I will even through these in my rotary tool (dremel) and use them for fine work. I have been using the same one for cutting wood almost every day for 2 months and I have not noticed any issues with it yet. I still have a cut on my hand from lightly grazing this bit with the CNC turned off. Great quality all around!
Customer
May 14, 2025
I was a little concerned about the small size of these cutters, but they end up cutting great in softwood and corian.Can't beat them for the price.I will buy more cutters from SpeTools.
Customer
May 12, 2025
I had been trying to do some fine engraving in brass using 0.1mm tip flat grind engravers, and struggling mightily. Even though these tools have a bigger tip, I re-worked my design to accommodate the size difference and what an amazing difference. These are cutting much better, and LASTING. After a few test cuts the tip looks perfect at 40x macro. The old point engravers would lose their tip almost immediately. These having two flutes helps to. As long as my design and handle the larger size, I'm glad I switched. Running at 24k rpm, 0.25mm depth of cut, .5mm width of cut.
Alec Marshall
May 11, 2025
These worked great for engraving brass and aluminum for a set of wax seal stamps I was making! I used Vcarve to generate toolpaths but these little mills can do surprisingly fast. For feeds and speeds I had 10 IPM and 0.01 DOC in both aluminum and brass and I never broke the cutter (in about 2.5 hours of machining).
Paul J. Sgrillo
May 6, 2025
These bits do a very nice job rendering the fine detail on the images and bas reliefs I do on my cnc machine. The seem very sharp and for the price are excellent.
Dan
April 11, 2025
I bought a 5-pack of these bits for $20, not expecting much. The first bit held up really well through a 10 hour hardwood (cherry) 3D carve. Still sharp afterward. I used the same but as an end mill to cut out some laser cutting design from 1/8" plywood. The bit is still sharp. If the other 4 bits in the pack hold up this well, they're a steal at $20.
shad
April 7, 2025
I do alot of 3d cnc milling on walnut. This bits are sharp and last along time. They leave a amooth finish and get into thoughts hard to get spots. Ive tried some other brands and these are the best I have found so far
Nazareth
February 26, 2025
This is a profile I cut out of siren head and attached to a chest I build for my son's girlfriend's son. I was able to use this to clear out the sharp angles and even clear the skinny area above the R and B in the name. Feed rate of 640 mm/min, stepover 20%, and RPM of 18000. Hope this helps.
Satisfied customer
February 10, 2025
Cut well and shed chips well. Seems pretty tough for a small bit. I was able to run it faster that end mills of similar size. I was using it on hard plastic for nametags and oak, hickory and walnut for inlays and engraving.
CSW
February 2, 2025
Expected a bit this give to break during a long 3d vcarve finish pass. But, handled two long runs with great results
NILESH D.
January 23, 2025
The media could not be loaded.
PROTO Industrial
January 21, 2025
Con estas pequeñas herramientas de grabado me apoyo para marcar y grabar bases de acero 1018, 12L14 y de aluminio. Trabajan excelentemente y duran 20 veces más que un cortador vertical de carburo del mismo dÃmetro. 18,000 rpm, lubricación y avances de 200mm/min X 0.125mm (0.005") de corte por pasada y durarán muchÃsimo
Eldar Gerfanov
January 19, 2025
The grind seems to be good, but the tip diameter is actually 2.2mm. It is OK for my use and could be just my batch, but do make sure you measure them before using.
Kevin
January 18, 2025
I am very impressed with the detail that can be cut with one of these. They are far stronger than my 1/16th inch bits and yet the point tapers down to about half that size. I will even through these in my rotary tool (dremel) and use them for fine work. I have been using the same one for cutting wood almost every day for 2 months and I have not noticed any issues with it yet. I still have a cut on my hand from lightly grazing this bit with the CNC turned off. Great quality all around!
Customer
January 16, 2025
I was a little concerned about the small size of these cutters, but they end up cutting great in softwood and corian.Can't beat them for the price.I will buy more cutters from SpeTools.
Recommended Products
$52.55
$ 26 .99 $26.99