Your cart is empty.
Your cart is empty.Product Description
Flexible and Convenient
Smooth Surface of Trachea, Thickened Tube Wall, Higher Explosion-proof Performance Than Ordinary Tube, Hard and Stable.
Strong Stability
It Can Transport a Variety of Media, Stable Performance, High Resilience, Folding the Seamless, Wide Application Scope.Easy Pipeline Transportation.
All-Weather Flexibility
Nylon Tube can Adapt to the Temperature Difference in Different Areas, can Withstand High and Low Temperature, Long Service Life.
Trachea Deformation
Small Bending Radius, Moderate Hardness, Not Easy out of the Line Bending Flat Clogging Phenomenon, a Wide Range of Applications
Tube Fittings Are Easy To Install, Flexible And Space-saving, 360-degree Rotate Freely, Release Rings Adopt Ellipse Design, Which Can Be Removed Conveniently.
Product Packaging
Edna Salomone
2025-09-01 15:55:20
The 1/4 inch OD Pneumatic Nylon Tube has proven to be a fantastic solution for my air truck horn needs.1. The nylon material of the tubing is robust and durable, capable of withstanding the rigors of outdoor use and heavy-duty applications.2. With a length of 32.8 feet, this tubing provides plenty of flexibility and reach, allowing for convenient installation and routing in various vehicle setups.3. The tubing maintains consistent airflow, ensuring reliable performance for my air truck horn without any leaks or interruptions.4. Installing the tubing was straightforward and hassle-free, thanks to its flexibility and compatibility with standard pneumatic fittings.**Overall Assessment:**The 1/4 inch OD Pneumatic Nylon Tube has exceeded my expectations as a solution for my air truck horn setup. Its durable construction, ample length, secure airflow, and ease of installation make it a top choice for pneumatic applications. Whether for truck horns or other pneumatic systems, this tubing offers reliable performance and peace of mind. I highly recommend it to anyone in need of quality pneumatic tubing for their automotive or industrial needs.
susan gates
2025-08-25 11:47:47
Quick and easy. Wire cutters and zip ties and you are good to go. In Phoenix. Dropped my out door temp on shaded patio from 106 to 96. Over 100 linear feet (~ 5 0 heads) and uses only 45 gal/ hour. With ball valves I have zoned it to use only 10 Gal/ hour for back patio only. Great DIY product…with associated valves and unions.
Fold Me Up Scotty
2025-07-14 17:25:05
Got the 4mm x 6mm version to suck transmission fluid from the pan, these provide the stiffness for the suction and work really well. These pneumatic tubes are a go!
Fred
2025-06-21 16:49:49
Excellent Product, Excellent Price, and Excellent Quality.
J. Stromquist
2025-06-12 14:37:28
I recently bought this to replace the lines on my spring air lift bags on my Chevy chassis motorhome. When I got it and began to work with it I began to understand what they meant by rigid tubing. It is very hard difficult to cut with a knife; so hard that it is not adequately gripped by my push-on fittings and not sealing adequately in those fittings, causing slow leaks, a real problem for a manually filled air bag system. My system has electronic pressure monitoring so I can watch the pressure drop about a pound every 30 seconds. After fighting with this stuff for about a half a day, I decided to purchase a Polyurethane product (hopefully softer) by the same manufacturer. For now, I am rendered without functioning air bags, so I'm riding low.Update: After purchasing the Polyurethane product I could tell it was definitely softer (and more flexible,) much more like the original line. This was a lesson learned at time and expense I thought I'd pass on. I've already stopped the leak on one of my air bags as a result, and am working on the other.
Micah DeMent
2025-05-10 15:47:29
This stuff is just what it says it is. Very strong! Perfect for what I needed it to do.
Alan
2025-05-03 14:10:41
It has a thick wall for high pressure and should be great
tfaulk13
2025-04-12 21:32:36
The only issue is you have to warm up the poly hose if you want to straighten it out. I used a bucket of hot water to easily get the poly tubing to go exactly how and where I wanted it to. Worked great in conjunction with the pushlock fittings designed for this poly tubing.
Brend
2025-03-16 13:51:38
Parfait pour un kit de suspension à air
ulises magdaleno
2025-01-19 15:24:52
En la caja trae otras especificaciones qué no se parecen a las del provedor
Recommended Products