Your cart is empty.
Your cart is empty.Product Description
TH3030 is 2 offset benders in 1 tool. Until now, utilizing 1/2" and 3/4" conduit would require purchasing two different offset benders. This revolutionary, patented design allows you to change your die in under a minute, no tools required.
Patented 2 in 1 Design
Change Die Size in Under a Minute, No Tools Required
Lightweight Cast Aluminum Dies
Alignment Marks
Casey Cooper
September 4, 2025
I like this dual-function offset bender a lot. It saves me carrying two around and it cost about 1/3 the cost of two Greenlee benders. It is well enough made and does what I need. For the electrician who doesn't work on conduit every day, this is great. Space is at a premium in my truck, and this helps outHowever, it does not work as well as the Greenlee. It takes more effort to bend and the offset is off a little, but still better than my bends. I think part of it is due to the Greenlee having a thicker die, which flexes less.Like I said, for the electrician who works with EMT on a semi-regular basis, this is great. It's a real time saver and worth having in the truck. As with anything else, those who bend EMT daily should invest in the best possible tool, both for ease of operation and longevity.
Tim O.
September 2, 2025
I am a low voltage contractor and very rarely need to do conduit work. I do however own a manual 1/2 and a 3/4 bender that I am fairly good at using once I remember how to do it again since it's rare that I need to. I just landed a huge job that was going to require more offsets in one job than I have ever done in my life. This tool was perfect! Did the job and left no waste! I don't leave comments but this was a must. Thanks to whoever came up with this.
Kerry Brasher
August 29, 2025
It’s quick and as smooth as butter a must have tool
adrian
August 16, 2025
Easy to used .Saves labor time.
Tackleberry
June 26, 2025
This is one of the smartest tools I've come across. I used to make offsets the old-fashioned way, buying them. Making them on a manual curved bender was not my forte. If it's not something you do all the time it's a bit of a relearned lesson. I'd throw away a full length or two of conduit just trying to get back into practice. I needed to help a friend wire his garage and also decided it was time to rewire my old pole barn. With the local big box store wanting $6 for each offset, this quickly paid for itself. This thing saved us time.I can't speak to constant professional use, but it certainly is a well-built and hefty piece of metal. I definitely recommend having it on a hard surface as you need quite a bit of pressure running down the cam. If I had a recommendation for change, it would be to have a way to quickly lock either side of the bottom plate to a hard mount.
Andrews electric
May 19, 2025
Easy to use, way less expensive than the other big green brand and it's 2 sizes in one unit. Everything I have that's made by temco is great quality
Jeff Knowles
April 27, 2025
Doesn’t not bend correct offset sending back immediately.
James E.
March 20, 2025
Perfect offset bend every time. REQUIRES no skill.
Allen
January 28, 2025
I have been using this tool for 3+ months and it works very well. There is limited space in the service truck, so having one tool instead of two (both 1/2in and 3/4" EMT in one offset bender) is a bonus - not to mention the cost of buying two tools instead of one. The tool changes sizes quickly without a lot of fuss but be careful not to lose the springs. Follow the instructions and the bends are perfect every time.
Michael
January 24, 2025
Works as it should.
Riley
December 27, 2024
Got this bender for a job requiring a lot of slab mounted octagons, for lights, daisy chained together by less than 10ft, straight lengths of emt. Quick for apprentices to put in an offest and hand up the stick while another measures and mounts the next box. Also, super handy to be able to add box offsets last, after all other bends and adjustments have been made. Really slick tool, but after about 100-150 bends the pins holding the dies together bent and caused the tool to bind and become difficult to use. Don't know if the tool was abused by an apprentice, but it's an pretty easy fix with replacement parts and a little tlc. Otherwise, really slick tool. Would recommend to anyone doing any jobs with an exposed concrete ceiling, as seems to be in fashion these days
Recommended Products