Your cart is empty.
Your cart is empty.Product Description
Easiest wire connector on the market - TICONN Heat Shrink Connectors
Whether you are working on your boat, vehicle, home or scientific projects, TICONN heat shrink connectors will ensure strong crimps, increased current flow and waterproof connections every time!
Specification:
- Shrinkage ratio 3: 1
- Minimum shrink temperature: 175°F (80°C)
- Full recovery temperature: 265°F (130°C)
- Operating temperature: -65°F–255°F (55°C - 125°C)
Note: For best results, please choose the right connector, use a hot air gun, heat evenly until connector reduces in size and the adhesive flows, filling gaps within the terminals.
Evenly Shrinking
Evenly Shrink when heated, no deformation or burn.
Waterproof
Two ends completed sealed after shrinking, waterproof.
Thickened Copper Layer
Thickened tinned copper layer, better conductivity and shape.
Interior Structure
Delicate interior structure.
Instruction
Jon
August 14, 2025
Good size easy to use great crimping. Functions well speedy shipping and good quality
Nicka
August 13, 2025
Good assortment at a good price. I used the small gauge ones to crimp some wires. They heat shrink down nicely and even melt around the crimps made when you… crimp them. Would buy again.
Customer
July 15, 2025
Work great
Ryan A
July 12, 2025
They seemed to work great and hold up well. Had a wire under my truck connected to one that had a huge chunk of frozen ice on it and it held it great
Dave M
July 8, 2025
These work great and produce a very strong connection.The crimping tool I have only crimps down to about 20 gauge, so for smaller wires I had to use some needle nose pliers and crimp it further. The tubes also will not actually shrink to 22 gauge, but you can gently crimp the ends with needle nose pliers while they are still hot and it will seal to itself. I guess technically that means it still works with 22 gauge, but not great. Doesn't look as tidy either.In any case, I give these the full five stars. For gauges 20 and below, which is 99% of what I work with, these work great.They crimp down tightly and the glue easily flows out of the tubes before hardening and forming a flexible, watertight seal.Next time I will order a larger box, I used quite a few on my project motorcycle. It had a bunch of electrical tape connections and cheap, low quality connectors throughout the harness when I bought it. These worked great to replace all those connections, and they are MUCH stronger than the cheap plastic connectors.
Tracy Laudenslager
May 8, 2025
Fast service. Great product. Exactly what I needed for piece of mind for my DIY Ham Radio project
Nataliekk
February 16, 2025
No issues with these. Works well. Easy to use.
Robert Walker
December 9, 2024
Plenty of sizes for a home shop. Easy to melt.
Recommended Products