Your cart is empty.
Your cart is empty.Time-Sert Inch Kit 7/16-14 Provided Insert length is .600 inches. Thread Kit Contains: Drill, Counterbore, Tap, Installation Driver, (5) Steel Inserts.
Customer
2025-08-26 10:12:34
Once I removed this from the box you could tell that this is very high quality made product. I used these to repair the stripped out threads in my aluminum bell housing for my 1985 Jeep cj7. This is a common problem on these Bell housings. These may seem like they are a little expensive but it is worth every penny considering it would have cost me $300 for a new bell housing and buying a used one I probably would have ran into the same problem. Very easy to use the only thing I needed to do was buy longer inserts as it came with half inch long inserts and I needed 1 in Long. Had the repair finished in about 20 minutes. My only grief and frustration is with Amazon. For a product that comes in a plastic case the size of about 6 in by 4 in they would box up. What morons would put $100 product that comes in a plastic box in a unpadded envelope. Luckily nothing was damaged but from now on I am going to enter that this is a gift so everything will be boxed up. I understand they are pressed for time in the shipping department but if they're not going to use their brains I will have them go the extra length to box it up. It seems like they're doing this more and more. Just click this is a gift if you do purchase and it will be boxed up.
Mark J.
2025-06-23 18:17:14
I was introduced to timesert when I needed to repair a stripped thread on my AMC 401 rebuild…..machine shop offered to do it or send me their timesert kit in the mail. Ended up getting my own and have never looked back. Machine shop quality repairs every time. This is a repair in a stripped vintage drill press housing….worked exceptionally well.
Customer
2025-05-11 15:15:13
easy to use
rob rohe
2025-04-09 13:41:01
I bought this to repair a couple of stripped out holes on my transmission bell housing. Worked great!always be sure to use a thread lubricant on the insert tool when installing or you run the risk of snapping the insert tool. I also used some loctite on the inset threads for good measure.
Scott D.
2025-03-21 17:40:09
This is a really nice kit ! It worked exactly like it was suppose too ! Very pleased ! I used this to fix a bbc head stud that had pulled the threads out
Stephen J. Dilley
2025-03-20 10:03:21
I recently stripped the treads of a head stud in my 1930 Model A. I saw the demo for the Time-sert on line and thought it would be a great fix. I did run into one problem in that the hole to put the Time-sert into was the same length as the Time-sert. Since the tool to thread the hole does not have the treads that go all the way to the bottom, the Time-sert would not screw all the way in. I did not feel comfortable drilling the hole in the block deeper to accommodate the length need. So I ground the end of the Time-sert so it would screw all the in. There still seemed be be plenty on thread to lock it in place in the block.This solved the problem and the A is back on the road running fine.
clay Huckins
2025-02-06 10:52:28
THE BEST OF THE BEAT TIME SERT
Party Department
2024-12-26 17:58:27
I ordered this product and was only able to use it once before it broke. Cannot contact seller because it's been more than 30 days since order was placed. Please contact!
Recommended Products
$172.15
$ 69 .99 $69.99