JC
2025-08-26 12:15:00
Thin, strong, sharp. Great as a set, as one can be used as a base to pry against to prevent marring the surface. Perfect for trim removal and cleanup. Turns out that the variety of sizes is very helpful.
Boss Beard
2025-08-20 15:52:21
This lightweight stainless steel tool is strong, yet thin. It is thicker and sharper on the angled prying edge side. The tapered straight edge is approximately 1/64 inch thick at the scraper edge... and the stainless steel edge can easily be resharpened if necessary. The size is perfect for sliding behind trim without damaging walls. It also includes a nail remover.
Roger B
2025-08-18 17:18:31
Just got done removing about 200 linear feet of baseboard molding and aside from scoring the caulking with a razor knife I didn't need any other tools at all. It's the slimmest prybar I've ever used. After scoring the caulking I was able to just press this is between the wall and baseboard, no tapping with a hammer. Some of the finish nails that didn't come out with the baseboard slipped right out with the nail puller. Also nice that it's narrow so it fits in tight spaces. On top of all that, it's just a beautiful stainless steel finish I almost didn't want to mess it up, but after the job it still looks brand new. Yes it's thin but it's not going to bend or break, there is a little flex but no worries. Definitely a must if you are doing trim work and removing moldings and casings. Perfect size where it's easy to throw in your bag. Scraper was sharp as well and made it easy to scrape old caulking off. Buy this. Even though I won't need it on a daily basis it's already one of my favorite tools.
Payam Pourreza
2025-07-16 18:22:11
Great product. Very thin and gets into the tightest slits but still strong enough to pry open a trim you need to separate. Made my job super easy. Love these.
Stephen Dee
2025-07-01 10:20:20
This Titan tool is good quality and well made. The sides are quite square where most others of this sort have a nice feeling chamfer to them. The long pry end has about a 5/128" flat on the end of it where the main body is ~3/32" thick. The scraper on the short pry end comes with a cover and is well sharpened to a knife-edge. The short pry angle is about 85°.I compared this with four other brands of these 9" pry tools. Of the three stainless tools, ("Grip" and Weichuan were the other two), this one has an acceptable finished and sports a very sharp scraping edge for $1 more than the Grip. Of these, I would take the Grip tool and sharpen the scraper edge myself if that was important as it's a beautiful piece and feels great to hold and work with. The best deal, however, was definitely on a pair of stainless pry tools from Weichuan that were quite nice, same steel quality at half the price, and perhaps a slightly better finish than this Titan tool, although an inconsistent angle on the pry end between the pair of Weichuan tools.There were two other non-stainless brands and the strongest and thickest of all the tools was from Bates and is the one I kept after reviewing them all. The final tool I looked at was from Spec Ops with a poor finish and equivalent strength to the others. It looked really nice and was well packaged, but not a serious contender in this group of $10ish pry tools - it was the only one in the group that I would recommend not buying - the others are all solid purchases, depending on what's important to you.
Robbie
2025-06-24 15:24:44
Owned this Titan pair for a long long time and used them very frequently.Had a contractor I let use the small one and he really liked it so I gave him both of mine and ordered a replacement pair (🤫, don’t tell the wife I did that). The replacement pair I ordered are identical to my original Titans.Quality, grip, flexibility, durability and ease of use are all 5âï¸.Highly recommend them for an addition to anyone’s homeowner’s tool box.
c scheel
2025-05-26 15:55:57
Perfect tool for working with trim. I'm installing whole house trim including doors and baseboards. Thin edge allows prying off boards without damage to sheetrock. Sharp enough to scrape off excess sheetrock as needed to level trim.
sean
2025-05-19 10:09:49
This is the best small EDC pry bar I have used. It is the perfect size, and the chisel angles on both sides are better than the others I have tried. I do have to put a "cap" on the ends, because it will end up rubbing a hole in my EDC pouch. It's less expensive than other pry bars that are titanium, but I find it's design way more functional.
giorgio
2025-05-05 11:59:30
Buon materiale , se lo usi bene ti dura nel tempo
Moises V.
2025-04-22 10:37:21
Buena calidad, y práctico de tamaño
Nextdoors Cat
2025-03-25 12:56:15
For the size, this is a very sturdy little tool. Very sharp edges (ideally need covering caps so they don’t damage something) that have proved to be useful, and with the gauge of steel used it doesn’t flex. Recommended addition to toolkit or edc.
Vincent
2024-12-25 19:39:31
Had to buy this product again as my set was stolen. Excellent quality tools.
Mr.D
2024-11-26 16:52:47
Item was lost by La Poste. But the problem is Amazon refused to deal with it. La Poste says only the sender can complain or search for lost item because they send it. Now I lost money, I lost nice tool and Amazon says - this is your problem… Not nice at all