Your cart is empty.
Your cart is empty.Product Description
Fuel Line Hose NBR Rubber
High-quality nylon filament material, long service life, wear resistance and high temperature resistance, perfect racing fuel injection accessories.
Gas Inline Fuel Filter
Built-in magnet can absorb metal impurities, purify gasoline and protect engine. Prevent metal powder from entering the engine, prevent the fuel system from blocking and ensure the stable operation of the engine.
Fuel Line kits
Related Products
-30 ° C -120 ° C | Adapt to temperature | -40 F - 300 F |
300Psi | Working Pressure | 300 psi |
6Ft | Tubing length | 10Ft |
| | Clamp |
-30 ° C -120 ° C | Adapt to temperature | -22F - 338F |
300Psi | Working Pressure | 60 psi |
6Ft | Tubing length | 10Ft |
| | Clamp | |
- Fuel Line Hose NBR Rubber
- Rubber fuel hose
Donnie
August 21, 2025
Bought this for the fuel line. It's good quality so far. I needed fuel line that was more flexible than the kind for automotive. It's still very durable but also pliable for bends and adding a fuel filter. Fitted to a 1988 HD Sportster 883.The fuel line and clamps are good. I don't have an opinion on the fuel filters, but I'll likely not sure them.For $8.99, the hose and clamps were just what I needed for this project. Lots of extra fuel hose I'll end up using on my other motorcycles.Easy to cut, tight fitment, and no leaks with or without the clamps (see photo).
Frank Rose
August 16, 2025
Fast shipping and quality hose and clamps.
Dragon9
August 10, 2025
I got this kit with the type 2 spring loaded simple pressure clamps, because the screw clamps always present issues trying to tighten in small spaces and the threads chew up things like rubber hose. The spring clamps with this kit are useless, they are far too small for the FAT and DURABLE hose that comes with this kit. So I used cable ties to cinch the connections. The hose is so thick that it is very difficult to pass over barbed plastic gas line connections, I used hot water first to make it stretch. But then the T2 spring clamps, which barely fit over the hose empty, can no way be wiggled over the thick hose and barb protrusions. (I'm not sure how they sized the screw clamps, if they're this tight they may also be useless.) The issue could be the hose is over-specced, but the upside of this is it should now outlive my tractor. Minus 2* for useless clamps, plus 1* for good hose and bonus filters, which look ok.
Renae Hays
August 4, 2025
Everything works great. Nice clamps
Scarface
August 3, 2025
Lowest Price. Unbelievable How Fast Amazon Shipping Is!
Jon n Josh's dad
July 13, 2025
fuel hose is great. clamps are too small for the hose; very difficult to slide over hose when it stretches from the fitting. Plastic for filter is too flimsy. My setup made for slight tension on the filter from the hose and it bent the filter nipple and broke it. Ordered a different filter.
Roy
July 3, 2025
not exactly what i was wanting ? but will work , nice connectors with hose ...
DG
May 21, 2025
Works as it should, but one end of one filter snapped off where it changes diameter. (Reason for a 4)I pushed the gas line on up and used it anyway.It has a little magnet in the filter. ðŸ‘ðŸ¼
Customer
May 18, 2025
Good quality fuel line and clamps. Easily replaced some old fuel lines and clamps worked perfectly. Great deal and it come with the added bonus of filters.
Customer
April 22, 2025
Fuel line is good quality, but the clamps a bit small.
Bob D
February 27, 2025
Just as the description stated and worked great ðŸ‘
Client d'
February 20, 2025
ces presque que donner. satisfait a 100/100
Kevin
February 6, 2025
Cheap material for filters, careful installation required or you can crack the housing just installing the fuel hose. Helps to warm up the hose first.
Recommended Products