Your cart is empty.
Your cart is empty.Product Description
B. Meek
2025-08-31 15:36:08
Great price!
William Malonson
2025-07-30 16:30:03
It fits and works.
riverraisin
2025-07-20 14:20:35
In my included pics you can clearly see the different interior and exterior material molded into this KIKITE 10 Feet 3/16 Inch ID Fuel Line. This is not reinforced hose, so it is best for use where your fuel line has no chance of rubbing against any other part.It's quite flexible and can make those tighter bends that a stiffer hose would not make.The included 20 clamps go on easy and fit snuggly. However, they do not compress the hose much at all, so it's important to have the right size hose that will fit securely on whatever fitting they are attached to. The clamps will merely keep it in place.Good quality non-reinforced hose at a decent value.
Lifetimesooner
2025-06-16 13:46:07
This worked perfectly! I had a Champion 5000 watt generator that had been sitting in the elements for over 5 years. This replaced the vent lines and fuel lines. Two pulls and it started right up! No leakage, it appears to be durable and best of all, it worked perfectly!
(michael wardlow
2025-06-14 15:24:52
worked ok on EF CUT C30
Natalie
2025-04-07 14:23:57
Fits as expected and fixed my pony; replaced all fuel lines and return line on my riding lawnmower with hose to spare.
LEH
2025-02-07 14:19:01
Quickly replaced a worn out lawn mower fuel line from the gas tank to the fuel filter, with a section of this tubing and clamps this afternoon. The old line was 3.25 feet and many of the products offered were sadly only 3 ft. This one was easy to route and the included clamps sealed the hose around the barb fittings.This tubing is NOT reinforced, so not suited to cases that require pressure, but works great as the line from fuel tank to fuel pump. It snaked through several 90 degree turns plus one 180 degree U turn at the filter. See pictures.The tubing material is soft and pliable, which make it reasonably easy to cut, route and install on the barb fittings without breaking anything.The spring clips are a great addition that can be used with this tubing as well as many others.
David B
2025-02-02 12:04:37
Flexible and thin-walled and 10 feet long. Comes with some very stiff clamps and you will need some pliers to install these clamps. This hose is possibly also suitable for vacuum.I used some of this fuel hose to replace the 26 year old hose to my RV's generator. It fit snuggly on my fuel filter and the fuel pump. It also cut well with some side cutters but easier with a PVC cutter.I would not trust it to handle higher pressures from fuel injection.This soft hose probably can not handle super sharp bends without collasping so watch the turns or be creative and heat it in some boiling water then cool it down in some cold water to form bends.FIVE STARS
Jim
2025-01-20 17:03:12
Good quality - properly sized - 1/4 ID was as stated - comparable price.Tried other brand and was disappointed with their quality, and their 1/4 ID was actually 3/16 - returned.
Recommended Products