Your cart is empty.
Your cart is empty.Product Description
How to inatall Electric Engine Cooling Fan Clutch?
1. Remove the bolts and push pins that attach the intake air baffle to the radiator support, then remove the baffle. (On 2002s only)
2. Disconnect the transmission cooler lines at the engine bracket and fan shroud.
3. Disconnect the electro-viscous clutch electrical connector from the shroud.
4. Remove the upper radiator hose from the radiator; be prepared for coolant spillage.
5. Remove the fan clutch hub from the water pump by turning it counterclockwise.
6. Unclip the shroud from the radiator side panels then tilt the condenser and radiator forward. This will be easier if someone assists you.
7. Remove the fan and shroud as one unit by lifting straight up as the condenser and radiator are being held in the forward position.
8. The fan can now be unbolted from the clutch, if necessary. Be sure to tighten the fan-to-clutch bolts to the torque listed in this chapter's specifications(20 Ft.-lb.)
9. Installation is reverse removal, Tighten the fan hub nut to the torque listed in this chapter's specifications(41 FT.-Lbs)!
10. Check the coolant level, adding as necessary to bring it to the appropriate level.
Other Part Numbers:
- 15022300, 15049054, 15073014, 15073580, 15089746, 15090986, 15154901, 15166906, 15705028, 15710101, 15735394, 15738321, 15976893, 15976997, 15977341, 15998151, 15999126, 19150977, 20847197, 20908447, 20913877, 22135975, 22136731, 22149858, 22149877, 22149880, 22149891, 22150373, 22150377, 25744727, 25744728, 8150909860, 8151549010, 8159768930, 84387220, 88986801, 8971166560,
- Electric Engine Cooling Fan Clutch
- Package Included: 1 x Fan Clutch
- Material: Aluminum
- Brand New
- OEM Part Numbers：2786, 94673572, 94673573, 15022299
Thomas
August 27, 2025
Great value, didn't know my old one was bad until I put the new one on. Then it was obvious.
J. Chacon
August 19, 2025
Edit: So I've put about 8k on this fan clutch and so far it's been pretty great. It is definitely loud when the fan kicks on and you can hear it well, but I honestly prefer to hear it so I know when it is working. Keeps my engine cool, and that's all I can really ask for.Fan clutch fit my 2002 Silverado 2500HD. No issues so far. Seems to be built well and looks almost exactly like the OEM part. Fit just like factory and you can definitely hear the fan whirl now when starting the engine. Made my ac blow cold the second the vehicle started. Time will tell of its reliability down the road, but so far no qualms.
jose sanchez
August 4, 2025
perfect
aliciaicila
July 24, 2025
Not as heavy as OEM and seems cheaply built don't expect it to last long, but fingers crossed.
Customer
June 1, 2025
It a good value for the money.
LISA F.
March 16, 2025
Good quality part. My mistake just ordered it on someone's work I never looked to confirm I even needed one
Harley Clyde
February 16, 2025
Great deal on a quality exact fit replacement part
Joeydogday
December 6, 2024
2004 6.0 gas and was what I needed
Recommended Products
$47.56
$ 24 .99 $24.99