Your cart is empty.
Your cart is empty.Turbosmart Silicone Hoses are manufactured from a high-grade silicone and offer superior temperature resistance which makes them ideal for cooling/heating and charged-air applications. All hoses are pressure rated to 220PSI. Turbosmart's Silicone hoses will last longer, perform better and will not deform under extreme conditions. An inexpensive and practical performance modification for all types of vehicles. they are available in a wide range of styles and diameters from 40 and 90 degree elbows, hump and straight hoses, pre-cut and full lengths, vacuum hoses, silicone and billet joiners and reducers.
Allen G.
2025-05-28 14:13:10
This is fantastic vacuum hose. It's soft and supple. It's easy to cut. It holds a good vacuum. I like being able to add a little color to the engine bay as well. I can easily see all the lines that I've replaced.
bobatious
2025-05-15 15:13:59
Used to help repair a secondary air fail in 2003 VW passat.Very easy to use a route through busy engine compartment; should last better than original hose near engine exhaust manifold where temperatures can get rather high. Installs and clamps just as easily as original rubber hose, and price value is even better.Recommended for similar purposes.
John H.
2025-05-07 10:43:37
Arrived when expected, as expected. Decent price. Good project. Does the job and clearly will outlast the car.
edlib
2025-04-03 18:49:41
These were a good price, but too soft to hold a strong vacuum. They easily flatten when you squeeze between thumb and forefinger. If you don't need a strong vacuum hose, then they are OK. If you are looking for performance, then you need a thicker-walled hose.
Ken Waldrop
2025-04-01 14:49:47
I bought the blue 4mm hose and used it to replace some old vacuum hose on my car. This product does what it needs to do, the side walls seem thick enough to withstand vacuum collapse, and the color stands out so you can clearly see the vacuum lines. I will probably do the same for my other vacuum hoses. I like the fact that silicone is wear, heat and oil resistant. The only down side - if the tube doesn't fit easily or is in a hard to reach area, don't try to use pliers to pull it onto the hose connection. That works with rubber but it tends to tear silicone.
Five 28
2025-02-18 15:47:07
I just replaced three vacuum hoses on a Saab 9-5 Aero and they were easy to install and the blue color makes it easy to know which ones were replaced. Being silicone, they feel like they will last a long time.
SCOTT RANDALL
2025-02-04 13:27:02
These are what they described but read description carefully picture shows 3 hoses but it is actually 1 hose worked perfectly for vaccum hose replacement on my Jeep
Jim
2024-12-05 12:11:28
I purchased several different colors of this house and re-plumbed all the vaccum lines in my 1996 Ford Bronco with a 5.0. Time has yet to tell how well the hoses will hold up but so far I really like them. They are soft enough to work with but stiff enough to not easily kink. The tubing wall is thicker than I thought it would be which is nice. I wouldn't hesitate to purchase again.
raul333
2024-11-27 21:52:35
Lo único malo que los pedà en rojo y me vinieron en azul, pero como tampoco se van a ver mucho y los necesitaba tampoco le di importancia.De momento los he usado para los tubos de vacÃo del coche y aguantan el calor y la presión asi que contento.El precio es bueno ya que si comprar los OEM negros cuestan más.
Recommended Products
