Your cart is empty.
Your cart is empty.Product Description
Enjoy the UNREAL moments that Tyger Auto driven with the innovative gears.
TYGER TRUCK FENDER FLARES
Whether you are looking for factory style classic truck fender flares or a more eye-catching pocket bolt-riveted style fender flare, you’ll find them right here at TYGER Auto. Our truck fender flares are made with impact-resistant polypropylene, reinforced by well-developed injection molding technology.
TOUGHNESS COMBINES WITH GREAT LOOKS
This is where toughness combines with great looks. Not only that, but these bumper flares are also high-quality and easy for any vehicle owner to install themselves.
EASY INSTALLATION
Average install times of TYGER Auto fender flares range around 1 hour with minor drilling required, and are compatible with aftermarket bumpers, and the fender flares are backed by our industry TYGER BRAND. Shop our vast collection of wheel flares to find the perfect product to add to your vehicle as you make some DIY upgrades.
TYGER AUTO - Driven by Adventure
Founded in 2013 in California, Tyger Auto is a proud car culture innovator powered by a group of American and Canadian adventure seekers with lifelong automotive parts experience.
Our mission is to introduce innovative designs that emphasize excitement, reliability and value to car owners.
KEVIN H.
August 21, 2025
Very easy to install with a factory look when finished. Materials seem to be of a good quality. So far they have been very durable.
Phil Maloney
August 11, 2025
These work great. There's enough screw holes so that it holds on pretty tight all the way around. I've had them on for about two months so we'll see how things go.Nothing to do with the installation, but be prepared for some pain uninstalling whatever you already have. I had to take off the stock Chevy mud flaps and it was time consuming. Hopefully your screws aren't rusted away and are still reusbale because this fender flare set relies on you reusing those. Installation was easy, but the whole process including the uninstall of existing flaps takes some patience and maybe some power tools depending how bad it gets for you. Very happy with the product tho, they look great
INDIGOVERSE
July 26, 2025
These just arrived today for my 2018 Silverado 1500. They are the perfect size, not too big, not too small. Do not install these until you buy at least 25-30ft of rubber trim (another $30 bucks). The manufacturer apparently thinks pressing the hard, plastic edges of these against your clear coat won’t scratch up your paint over time. I used to have a set of bushwhackers on my last truck and that company provides the trim.Due to the fact that it didn’t come with rubber liner, I also used none of the provided hardware is I imagine it’s probably very cheap and prone to rusting. I spent another $8 bucks to get better quality hardware from the store.The fitment was surprisingly good except for the small flare that meets up with the bottom of the body near the front of the driver side and passenger side doors where the plastic mold was removed as per the instructions. I needed two 3/32nd drill bits as the first one broke half way through the job.I also used some thread locker as extra insurance against loosening due to vibrations. Hopefully these hold up well in the desert sun.
Paul Wimmer
July 17, 2025
These are decent flares and fit well on my Silverado 1500. I was able to get a very good fit and avoid any gaps by ignoring the included instructions.In my opinion, the instructions for installation are not helpful for obtaining the best installation. Following the instructions to the letter is likely to give a poor fit with gaps.
Kevin L.
July 14, 2025
These fit exactly perfect, the instructions are exactly correct. No chinglish here. They are a perfect fit and very easy to install.
Vincent L.
July 5, 2025
They look great are reasonably priced and are sturdy. I bought a used truck and used them to cover up some body damage around the wheel wells, which saved me $1000 in body work. The install design can definitely be improved, as the corners of the covers do not have screw holes in the design and that is where they have a tendency to come away from the body. I added 8 screw holes and screws in each of the 8 corners by drilling them in myself. This stopped the corners from separating from the body. Little extra work, but happy with the result. I would buy them again!
Leonel Garcia
May 30, 2025
These flares/moldings are only visually fit for this vehicle, you have to remove the existing mud/rock guard trims (which is not an issue). Main issue is that the mounting holes made on this molding are not meant to line up with the original existing holes along the fender. It’s comes with self tapping screw's to drill into the fender meaning you’ll get rust eventually and not to mention they will look off.
Name
May 16, 2025
Pickups need both fender flares AND mud flaps unless you live in the city. Mud flaps don’t fit the front and on the rear both forward and aft mud flaps need to be removed. Some basic product design would go a long way.
chris
April 23, 2025
I'm so happy how my truck looks now. I have a 2015 Silverado and if you've owned any GM/Chev truck for the last 20 years you know how the rear wheel wells rust. Mine were getting to the point that my truck looked like junk. I cut out all the rust and painted the exposed steel with rust converter and rust paint. It didn't have to be too pretty because the whole area would be covered by the flares. I know it doesn't solve the problem but maybe I'll get a couple more years before the rust shows again.Installation was easy but you must also purchase rubber stripping to go on the flares. It makes the fit so much better and will probably save your paint. I just bought the stripping that Amazon said other customers usually buy at the same time. These fenders look OEM and are a huge improvement on my truck.
Customer
March 28, 2025
Easy to install and fit great
Bob Thomas
December 16, 2024
They fit fairly well but be sure you use the stripping (sold separately). Even with the stripping, one flare just wouldn't sit flush. It protrudes about 1/2". They seem to be holding up well and are good a looking addition to the truck.
mg automan
November 25, 2024
N/a
Michel Lebrun
November 15, 2024
Facile à installer, j'ai du ajouter quelques vis afin que l'ajustement soit parfait, très satisfait
Recommended Products