Your cart is empty.
Your cart is empty.
Features:
a. Very thick glass and good chrome
b.The obvious, keep it away from excessive heat and vibration.
c. It's perfect for an old fuel system that gets dirty floating around from time to time!
Specification:
Fuel Filter Style: Inline
Inlet Quantity: One
Inlet Size: 3/8 in. /0.793 cm
Inlet Attachment: Hose barb
Outlet Quantity: One
Outlet Size: 5/16 in/ 0.793 cm
Outlet Attachment: Hose barb
Filter Element Included: Yes
Filter Element Material: Nylon
Filter Housing Material: Glass
Filter Housing Finish: Natural
Overall Length (in): 4.200 in. / 10.66 cm
Outside Diameter (in): 1.070 in./ 2.717 cm
Mounting Bracket Included: No
Fittings Included: No
Clamps Included: No
Quantity: Sold individually
TK in Oregon
2025-09-03 11:36:41
Added this just before the N80 on a 2003 Eurovan 24 valve engine. No problems. Quality looks good. Screen is easy to see. I bought 5 of them, since it’s a good value.
Al in Gloucester Va.
2025-08-19 17:11:01
It was added to my outboard motor fuel line to keep trash out of the carburetor. It’s good to kerp out trash, is cleanable and usable again, and any trash in the line is visible. Good filter.
jerry fortin
2025-08-15 16:29:40
This filter was used on an outboard motor, mixed oil and gas. Excellent quality and able to clean the filter is great. The glass allows you to see the fuel.
Kaenan Greene
2025-08-14 16:06:37
I DO NOT RECOMMEND TO PUT THIS ON A CAR!!!! It haS more of a chance of breaking and setting your car on fire than ANY other filter.Now with that being said, if you need them to filter dirty gas before it gets to your lawn mower engine or go-cart then this is perfect. Does a really good job filtering then take it apart, clean, and repeat.
Customer
2025-08-05 14:19:45
Easy to install no leakage fits perfectly quality was good shipping was very fast looks great highly recommend
Michael Hansen
2025-07-19 18:00:13
The ends are short, it takes effort to secure a hose to the end.
Pearl
2025-07-06 10:37:32
Flow of fuel is great and is easy to see. I think I'm going to buy one or more for my family car guys.
Nick S.
2025-06-26 15:40:26
I actually replaced a sediment filter on my ford tractor it is a diesel. I can see if I have anything in the filter and can unscrew it and clean it out and re-use it. Great product
Customer
2025-06-05 10:38:25
nice filter but the actual inlet and outlet id sizes are only 1/4 inch , od size is 3/8 , for a hose to go on , for fuel flow restriction its not very good for a larger engine , holes must be drilled out .
Dustin
2025-05-25 18:27:04
3/8†nipple isn’t barely big enough to hold a zip tie. Never mind a hose clamp. Cosmetically they look nice functionally not good. Nipple is way too short for a hose clamp
Theresa Sims
2025-05-01 16:42:25
So I took the filter apart and found that it only had one gasket where the mesh filter media meets the housing. Not sure if it's only supposed to have one or two. Other then that the housing does feel strong but time will tell.
71 nova
2025-04-15 10:07:35
Hose will not stay on nipples as they are too short, saftey issue don't buy
TK in Oregon
2025-04-02 17:35:17
Added this just before the N80 on a 2003 Eurovan 24 valve engine. No problems. Quality looks good. Screen is easy to see. I bought 5 of them, since it’s a good value.
Al in Gloucester Va.
2025-03-25 16:57:00
It was added to my outboard motor fuel line to keep trash out of the carburetor. It’s good to kerp out trash, is cleanable and usable again, and any trash in the line is visible. Good filter.
jerry fortin
2025-03-22 12:28:52
This filter was used on an outboard motor, mixed oil and gas. Excellent quality and able to clean the filter is great. The glass allows you to see the fuel.
Kaenan Greene
2025-03-01 13:35:34
I DO NOT RECOMMEND TO PUT THIS ON A CAR!!!! It haS more of a chance of breaking and setting your car on fire than ANY other filter.Now with that being said, if you need them to filter dirty gas before it gets to your lawn mower engine or go-cart then this is perfect. Does a really good job filtering then take it apart, clean, and repeat.
Customer
2025-02-14 15:41:15
Easy to install no leakage fits perfectly quality was good shipping was very fast looks great highly recommend
Michael Hansen
2025-01-31 18:52:55
The ends are short, it takes effort to secure a hose to the end.
Pearl
2025-01-19 20:53:46
Flow of fuel is great and is easy to see. I think I'm going to buy one or more for my family car guys.
Nick S.
2025-01-07 10:56:16
I actually replaced a sediment filter on my ford tractor it is a diesel. I can see if I have anything in the filter and can unscrew it and clean it out and re-use it. Great product
Customer
2024-12-31 13:32:57
nice filter but the actual inlet and outlet id sizes are only 1/4 inch , od size is 3/8 , for a hose to go on , for fuel flow restriction its not very good for a larger engine , holes must be drilled out .
Dustin
2024-12-20 12:10:07
3/8†nipple isn’t barely big enough to hold a zip tie. Never mind a hose clamp. Cosmetically they look nice functionally not good. Nipple is way too short for a hose clamp
Theresa Sims
2024-11-29 18:35:28
So I took the filter apart and found that it only had one gasket where the mesh filter media meets the housing. Not sure if it's only supposed to have one or two. Other then that the housing does feel strong but time will tell.
71 nova
2024-11-27 10:00:19
Hose will not stay on nipples as they are too short, saftey issue don't buy
Recommended Products
$29.99
$ 14 .99 $14.99