Your cart is empty.
Your cart is empty.
Ultimate Steel Hub Puller - Removes Fan Blades And Blower Wheels - Fits Up To 1-7/8" OD Hub
- Saves time and money
- wont damage blades or wheels
- accommodates 5/8" belt drive and 1/2"
- unique set screw can be used with both a wrench or hex key
- sight holes for aligning puller on motor shaft
- U.S. Patents 5,163,211 5,211,211
Mfg #: UP-1
What'sUp
July 22, 2025
This is an expensive item for the home owner , but it's still very much cheaper than hiring an "HVAC" company to come out and do the work for you! I have had a history of "HVAC" repair along with other construction matters, but I am totally disabled now and to be truthful this was just about more than I personally could handle on my own!I have in earlier years used many different types of fan blade pullers including this type and I have never once seen any of the others made any better than this one! I will tell you from experience that some fan blades simply will not fall off even with the best pullers which as I said earlier , I believe this style to be the best for that type of job! You must still understand that you may have to use this in combination with heat and something that will dissolve rust!However without this tool you would have a much harder time as you need something that can keep a constant pulling pressure on the blade as you work to remove it! It is made of very strong metal and is the best quality that I think a person can buy for a reasonable price! The company was very fast in shipping it to me and I am tickled with it! I needed one of these of my own back when I used to repair them , although I borrowed this type of puller from other people back then! It's well worth your consideration as you need all the help you can get on some fan blades! This is just what the doc ordered! Nothing less than all 5 stars for this company and their puller!!! Hope this helps you make your decision!
Sunshine
June 11, 2025
Thanks you. Does the job!
B Seward
May 3, 2025
Received item 1 day early. This thing is built like a tank. I had a squirrel cage that had slipped down on the motor shaft and was rubbing against the enclosure. First I used a hammer and some jury rigged stuff to move it a little, so it did not rub. Several days later, it started to rub again. I did not like having to hammer things and put stress on the motor bearings, so found this, and even though it was expensive, thought I would give it a try. My shaft is not rusted. Actually, motor and cage less than 2 year old, but it fit real tight. Used a little oil on the puller bolts, before installing them, and on the main bolt, to make it turn easier. Mounted very easily and pulled cage out, to where I needed, in less than a minute. This was worth its weight in gold. A service call would have cost much more, plus, I now have the tool. I would strongly recommend this to others.
Svctech
April 18, 2025
The title says it all
Victor
April 17, 2025
I’m not an air conditioning mechanic, but life has taught me the basics in electrical, plumbing and other essential fields needed to get by in everyday life.Years ago, I had a blower motor go out in an air handler in a rental property that our family owns. Without this tool, it literally took me HOURS to separate the motor from the squirrel cage using a drift pin and a hammer.Fast forward to a few days ago when I had the same problem happen with one of the two units in our primary home. Not wanting to have a repeat performance of my past experience with this same scenario, I decided to purchase this tool. I AM SO GLAD I DID!!! Now, I’m just wondering why I didn’t purchase this tool the first time around?I cleaned the exposed, surface rusted shaft with plumber’s sandpaper, sprayed the shaft with lubricant and mounted the tool as centered as possible. Just turn the bolt in a clockwise direction and the motor drops on the other end. SUPER EASY!Don’t be me years ago and go about this motor removal “caveman styleâ€. This tool is worth every penny I paid for it!!! No sweating, no hammer-hit fingers and no wasting of time - just perfect results!
PAUL GOSSARD
March 31, 2025
I purchased this puller to be able to remove the "squirrel cage" from my failed indoor air handler motor. I read every review including one from a person that complained that it was junk because it is made from aluminum. He was correct that it is made from aluminum but the very highest strength grade of aluminum. I also viewed a "You Tube" video that showed how the puller worked. The puller performed exactly like the video had demonstrated. I think one key to making the removal easy was the fact that I sprayed the hub and motor shaft every evening after work for 7 days until my new motor arrived. If you are considering a fan hun puller, this is the one that you need.
Cindy
February 1, 2025
Works great. My husband is a DIY guy. I do the internet research, I show him and he does the work. We've had some AC problems lately, and have learned a lot in the last few months. To remove a fan blade or a blower motor is almost impossible without a puller, and if you do get it off it's all beat up and takes hours or even days.After reading lots of reviews and watching YouTube videos, I was set on this one. It was a little bit more than what I wanted to pay but I thought, if I buy the cheaper one and it breaks or doesn't work, then I would have to buy an other one and wait for it to get here.I'm very happy with this tool. My husband had the blower motor off and the new one back on, in just a few minutes. Quicker then I could get the spot vacuumed to put it back in. I'm glad I spent the extra and got the better tool. He'll be able to use this tool for years to come.
Yunior
January 12, 2025
Lo he usado en aspas bien oxidadas y siempre las he logrado extraer por lo q lo recomiendo 100%
Recommended Products
