Your cart is empty.
Your cart is empty.Product Description
316564511 Replacement Stove Knob for Frigidaire Range / Stove / Oven
Product information :
Item 316564511 Stove Knobs compatible with Frigidaire Gas Range Stove/Oven
Material: PBT+Iron
Dimensions: 2.0 inches(Length)*2.0 inches(Width) * 1.8 inches(Hight)
Packing: 5 x 316564511 Stove Knob for Frigidaire
Advatage :
TURNEGOO stove knob is made of high quality PBT+Iron.
High-resistance PBT with the advantage of corrosion resistance, high temperature resistance and strong reinforcement. So that it can be installed more secure, durable sturdy and prolong the lifetime.
Save a lot of money for you. You can own such great replacement knobs at half the cost of original OEM ones.
[Replaces Part Number: ]
316564511 range stove knobs, only replace part numbers: 1513577, AH2364186,AP4433359, EA2364186
Compatible with Following MODELS but are not limited to:
BGGF3031KBG, BGGF3041KFD, BGGF3041KFE, BGGF3042KFE, BGGF3042KFG, BGGF3042KFH, BGGF3042KFK, BGGF3042KFM, CGGF3032KBD, CGGF3032KBG, CGGF3032KBJ, CGGF3032MBB, CGGF3032MFB, CGGF3032MFD, CGGF3042KFD, CGGF3042KFE, FGGF3030PFA, FGGF3031KBE, FGGF3031KBF,etc.
If you are not sure if our product is suitable for your stove or not, please do not buy it yet, Typical questions asked about products，let our technical engineer tell you whether it can be purchased. Thanks.
Choose the correct model
The installation hole diameter (D shaft size) is 0.25 inch/ 6.23 mm in length, 0.22 in/5.63 mm in width,(please refer to size picture) and measure your burner insert size to make sure this knob fits before purchasing.
Easy to stall
Easy to install the part YOURSELF and quickly get your range oven burner back to work within few minutes.
Multiple protection to prolong the lifetime
Made of high-resistance PBT+Iron with the advantage of corrosion resistance, So that it can be installed more secure, durable sturdy and prolong the lifetime.
Fotouno
2025-08-24 16:31:42
fit my stove perfectly
welder314
2025-07-24 14:41:29
These are lightweight, hollow plastic. There is a metal insert *inside* the shaft hole that is supposed to bite onto the shaft to hold it in place. But that insert is not secure in the hole, and when you install the knob it just shoves the insert up inside the knob, never to be retrieved again. And then the knob does not really stay attached. Of the 5 knobs, only 2 worked. I ended up gluing the other 3 on. I'm using these for an outdoor stove to replace some that had chrome plating that flaked off, so I appreciate the lack of coating on these. Other than that, they are junk.
Adam M.
2025-07-14 13:51:16
The media could not be loaded.
Lindsey
2025-07-12 12:40:05
I don’t know why I waited so long to order these! My stove knobs have been loose for the past year or so and I finally decided to replace them. The product came quickly and was so easy to install. Just pop the old knob off and push the new one in for a snug fit. Turning on my stove is much easier now!
Chuck
2025-07-08 11:15:11
FYI. The knob is a perfect replacement. One of the metal shelves was placed on the bottom of the oven for Thanksgiving. The oven was set to clean and the knob melted because the door didn’t close properly. User error caused this knob to melt but the original knobs didn’t melt.
Jenny
2025-06-23 21:43:08
It is well made but sits too deep, right up to the stove, which makes lighting impossible.
Daner8282
2025-05-31 11:57:12
Perfect replacement for our Kenmore gas range model number 790.78618504 . The metal inserts in the knobs are snug and properly reinforced.
Kristie Davis
2025-05-13 09:24:35
Got the biggest D ring available but was not big enough for my gas Frigidaire range.
Tom Steele
2025-05-10 17:12:25
Good knobs. Fit perfectly on my fridigaire stove
Unhappy Customer
2025-04-19 15:51:02
I have a Frigidaire Gas Range that this knob is supposedly designed to fit. The knob may look good, but it has a metal spring-clamp inside the stem that is loose, as can be seen in the photograph. As a result, when you push the knob onto a spindle of your range, one of two things happens. Either the knob goes too far along the spindle, in which case the knob can't initiate the igniter, or if you try to avoid that problem by pushing it onto the spindle a short distance, then the knob will probably come off the spindle when you try to use it. Useless.
RD
2025-03-30 14:37:19
I purchased these knobs to replace the aging ones on our gas range. They fit perfectly and make our stove look, almost, like new.
Cresta Del Toro
2025-03-19 18:26:28
Bought replacement knobs for gas stove as others were tired looking. Got these 5 knobs on October 29th. By November 16th, not even 17 days of use, one knob was already faulty. I get things are cheaply made nowadays but when it comes to products that might control the flow of human killing gas.... I expect a bit more quality. Stove was used and turned "off". Main floor of house was slowly filled with gas as the dial showed off but it didn't completely shut off the gas. Nice! This should be a ZERO STAR review.
harry singh
2025-02-01 19:04:38
The metal inside the stalk is not aligned with the flat side of the switch. One of the knob is different from the other (marking)
Recommended Products