Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell A63 Drive V-Belts 63' Inner Length 13mm Width 8mm Thick JIS Standard A-Section Rubber Drive Transmission Belt

4.7 (7) Write Review
Free shipping on orders over $29.99

$9.59

$ 3 .99 $3.99

In Stock

About this item

  • Size: Model: A63; Inner Length: 63"/1600mm;
  • Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.
  • Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
  • Feature: The trapezoidal shape of the belts cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment.
  • Applications: Used for drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, ect.


Product Description

How to measure the length of the required belt:

  1. Wrap the rope around the two pulleys
  2. Make a mark
  3. Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

  • To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
  • The width and thickness of the belt should also be measured to confirm the type of belt.

Installation:

  • First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.

Notice:

  • Pay attention to the wear of the belt groove of the v-belt pulley.
  • Check whether the centerline of the two pulley shafts is parallel, whether the corresponding pulley slots are aligned, and whether there is any skewing phenomenon.
  • When one v-belt is badly worn and cannot be used, replace all the v-belts at the same time, with the same type and equal length, so that each belt has the same tension.

Maintenance:

  • Regularly check the v-belt tension, after adjustment still can not meet the specified requirements, must be replaced with a new v-belt.
  • In use, the operating temperature of the v-belt should not exceed 140°F, do not apply belt grease casually.
  • Various types of v-belt, should not be coated with rosin or sticky substances, but also to prevent v-belt from oil, butter and gasoline, otherwise, it will corrode the v-belt, and shorten the service life.
  • V-belt should be stored at a relatively low temperature, with no direct sunlight and no oil and corrosive fumes place.

Application

v belt

Lawn Care Equipment

  • Repair lawn equipment, snow removal machine

v belt

General Purpose

  • Repair band saw, box fan, drilling machine, trimmer

v belt

Automotive Repair

  • Replace the automotive belt
Customer Reviews
4.6 out of 5 stars 66
4.4 out of 5 stars 228
4.4 out of 5 stars 276
4.4 out of 5 stars 107
4.6 out of 5 stars 31
4.6 out of 5 stars 18
Type B A M K O SPZ
Width 16mm 13mm 10mm 8mm 10mm 10mm
Thickness 11mm 9mm 6mm 6mm 6mm 9mm

Chase
2025-08-10 10:55:30
Strapped right on
Jim
2025-07-25 13:50:30
Holding up well on cub cadet deck
Delbert Schrader
2025-04-30 10:35:45
worked good on a riding lawnmower
craig eriksson
2025-04-10 14:18:43
This belt is over 2 inches longer than the 67 inches it says it is. Not only that it is very poor quality!
Invicta
2025-04-06 15:29:07
N/a
Client d'
2025-04-01 15:37:28
excellent produit
Barry Harvey
2025-01-28 14:04:07
Fit good
Recommended Products
Power Twist v Belt,3/8-inch x 5 Feet Z Type, Industrial Rubber Adjustable Link V-Belts, 3L Profile, 3/8' Width, 5' Length,Drive V Belt Perfect for Lathes, Drill Press, Table Saws

$36.99

$ 17 .99 $17.99

4.4
Select Option
D&D DURA-Prime PowerDrive A35 or 4L370 V-Belt 1/2 x 37in V-Belt

$9.50

$ 4 .99 $4.99

4.4
Select Option
Hanna Rubber 5L290 Replacement Belt

$7.40

$ 2 .99 $2.99

4.3
Select Option
D&D DURA-Prime A17 or 4L190 V-Belt 1/2 x 19in Vbelt

$6.50

$ 2 .99 $2.99

4.3
Select Option
D&D DURA-Prime PowerDrive B50 or 5L530 5/8 x 53in V-Belt

$14.16

$ 6 .99 $6.99

4.7
Select Option
Goodyear Belts A34 / 4L360 Classic Wrapped Industrial V-Belt, 36' Outside Circumference

$9.15

$ 3 .99 $3.99

4.9
Select Option
D&D DURA-Prime PowerDrive B45 or 5L480 5/8 x 48in V-Belt

$13.23

$ 6 .99 $6.99

4.3
Select Option
BESTORQ A96 or 4L980 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 98' Outside Circumference x .51' Width x .34' Height, Pack of 1

$15.49

$ 7 .99 $7.99

4.4
Select Option