Your cart is empty.
Your cart is empty. Description:
1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
2.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
3.Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
Specification:
Material : Spring Steel
Finish : Chemical Blackening
Material Thickness : 0.65mm
Material Width : 6mm
Spring OD : 36mm
Expand Length (about) : 680mm/26.8inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook
Package Content :
2 x Drill Press Spring
HEF6
September 3, 2025
Works great, a little time consuming to install
Mike Holmes
August 20, 2025
Fit very nicely in our older Harbor Freight bench top drill press. Easy to install
Phil
August 14, 2025
Worked perfectly on my drill press - installation was a little tough but only to be expected. Good price point
Ariegaw
July 25, 2025
Not the same as the original part. Functionality compared to the original part 80%, there is a drag not smooth as the original part.
Maury
July 24, 2025
When I bought these I was worried about how I could install it without the spring uncoiling and going all over the place. It turned out to be very simple. The spring comes with a metal band around it to hold it taut. Remove the spring housing from your tool. Remove the old, broken spring from the housing then insert the new spring making sure the tab on the new spring slips into the slot in the housing. Cut the metal band that is holding it taut and it uncoils nicely in the housing. Place the housing back on the tool making sure the end piece of the spring goes in the split bolt. Turn the housing until it had the tension you want then put the retaining nuts in the split bolt and you are done! I hope I never need to replace the spring again but if I need to purchase more I would definitely buy these again.
mochilover
July 18, 2025
Great spring but turned out was not cleared for medical devices. Had to return which was very easy at Amazon locker
Horace Williams
June 7, 2025
The size was not the exact width and thickness that I needed so I returned it. Make sure the one you order is exact width and thickness. Everything is in mm so do your homework in metrics for proper style.
Richard
June 6, 2025
Quick and easy replacement
Frederic Gagnon
March 3, 2025
Bonne qualité mais j’ai du me tromper à quelque part il n’on pas fait pour mon application
Vigneron
February 18, 2025
Parfait pour remplacer celui de la perceuse à colonne Mastercraft du Canadian Tire ! Facile et rapide d’installation en quelques minutes à peine.
Richard Hewitt
February 6, 2025
Used these to replace broken quill spring for my 30 year old MasterCraft 10" drill-press - works great. The chrome housing on my drill-press is about 41mm diameter so the 36mm x 6mm fitted nicely and was easy to install - but remember to fit with the wire band in place which automatically comes off during installation.The spring broke Friday evening, found the replacements on Amazon on Saturday and with same day delivery Sunday by Monday morning it was repaired. Highly recommended.
unL33T
February 3, 2025
Used this to fix a cheap Ryobi drill press that's been broken for a decade at work. Works as described. No issues so far after a few months.
Naaman c.
January 29, 2025
Need more details
Recommended Products
