Your cart is empty.
Your cart is empty.Product Description
Hand Reamers
High Speed Steel Tool
High-speed steel tools has combination of hardness and toughness for wear resistance. Suitable for most general purpose applications.
Straight Flute
Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. For reaming cylindrical shape holes.
Easy to Use
Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
Features
- Designed with the base substrate without any additional coatings.
- With high hardness and durability, the reamers provide finish cuts.
- Holes can be with exact size and shape after the reamers' processing.
Wide Applications
Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.Used for semi-finish machining and finish machining of holes.
C. PATTERSON
2025-08-31 17:40:17
Bought this tool to true up the safety on 80% AR15 lowers. Wow, it works perfect. Bought the tool holder set from Harbor F. and it fits in the largest one so, using it by hand with just a few turns all the way through to both sides and the safety works smooth.
DPeter2101
2025-08-24 17:06:31
Worked great. Used it three or four times without any problems and it seems to be good quality.
RD Customer
2025-07-22 14:06:50
Fits a large tap handle. Made well works well
David
2025-06-30 09:27:05
If you have some reaming to do this rascal is for you. It will ream out whatever needs to be reamed.
Michael Z. Williamson
2025-06-04 12:30:41
Exact size for the fire selector hole. Ream after drilling for a perfectly smooth, round fit. I've done dozens of them with no appreciable wear on the tool, even through hardcoat anodizing.
rocklin
2025-06-03 10:20:32
For my purposes it's a decent reamer with one drawback: the diameter of the shank is larger than the diameter of the flutes.1) When you are finished reaming you will have to back out, you can't go straight through.2) You can't use a bushing on the shank as a guide.
Roger Allen Kralik
2025-04-10 19:50:02
Overall quality seems very good I use it ream out 3/8" drill holes in 7075 aluminum an did what I expected it to do.
Chris Rayburn
2024-12-15 12:43:21
tool was rusty and pitted would not work for anything precision
Recommended Products