Your cart is empty.
Your cart is empty.Product Description
Hand Reamers
9CrSi (Alloy Tool Steel) Tool
The 9CrSi steel is a low alloy tool steel and low speed cutting tool steel. It has high hardening capacity and high tempering stability. Good for wide ranges of applications.
Straight Flute
Straight flute tools allow chips to collect in the flutes when cutting. Well suited for most applications in shallow cuts. For reaming cylindrical shape holes.
Easy to Use
Can be hand operated by use of wrenches. Great for light cut, repair work, or simply for enlarging holes. Always keep reamers clean, and used with machine oil for long service use.
Features
- Designed with the base substrate without any additional coatings
- With high hardness and durability, the reamers provide finish cuts.
- Holes can be with exact size and shape after the reamers' processing.
Wide Applications
Used for handicraft processing, and bore machining. Suitable for accurate reaming in aluminum, cast iron, copper, plastic, wood, and other soft materials.
Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.Used for semi-finish machining and finish machining of holes.
Customer
2025-09-04 13:42:50
I believe I needed this and used this to ream the pilot bearing on a British diesel engine, but now I cannot recall. I was fitting a Toyota Celica transmission.
Katie Reddon
2025-08-24 12:15:40
Worked well. I’m sure it wouldn’t like a harder metal but to ream some bronze bushings it worked great and left a nice finish
Alex Hand
2025-07-18 17:59:21
Had to resize a hole from 7.3mm to 8mm for a press fit. I went slowly by hand and was able to achieve the fit I needed.Could not have asked for better.
Barry Robertson
2025-06-30 17:50:47
Works as it should.
Joan Gindelberger
2025-06-04 14:01:10
I needed a 10 mm reamer for one small job. I was hesitant to but this due to some negativefeedback. But, as it was much cheaper than most ,I took chance. Now, I used this on aluminumnot steel so it cut easy. You just need to go slow and keep it lined up on the pre drilled hole. The predrilled hole must be one size (1/64) smaller than the finished bore. The reamer is not a drill and is used only to clean up the bore
Jack S.
2025-04-24 13:42:09
This reamer arrived undamaged and is precisely 8mm. I have only used it on soft materials and hard plastics, but it is holding up well and I expect to get a great deal of use from it.
Russell Clark
2025-04-12 15:22:48
This item does exactly what it was designed to do and at a fraction of the cost listed on another web site.
Vicky Brunges
2025-03-20 13:30:31
Was exactly what I expected.
Customer
2025-02-23 13:10:56
Wish it was an inch longer..
Alex Fisher
2025-02-11 09:16:41
Exactly what I'd hoped for, but unfortunately wasn't quite up to the job :(
Recommended Products
$34.99
$ 16 .99 $16.99