Your cart is empty.
Your cart is empty.Product Description
Specially designed vents and upper and lower cooling holes so your device dissipates heat faster and is less likely to stop running.
The network server cabinet rack enclosure has a strong load-bearing capacity, good storing all your network equipment.
Both side and front doors are equipped with locks to better keep your devices and data secure.
The server rack cabinet enclosure has fully adjustable square-hole mounting rails for simple equipment installation.
Customer
2025-09-05 18:29:14
I went from a rat’s nest to a sophisticated electrical showcase. Hahaha.. seriously, the unit was as advertised. For the price and quality, it’s well worth it. However, I did not hang my enclosure so I’m not sure if my ratings would change if I had to do so. Quick run down:1. Directions are minimal but it’s logical (again, I did not hang it so there could be complications there)2. There are a few pieces that will cut you so be careful when assembling.3. If you opt to leave it on the floor, make sure you have a good pad under it as the screws beneath the enclosure will scratch your floor.4. Good storage for about 6 items. I have a router, a few HD storage units and some other stuff.5. Easy to route cords out the back but you may need to sand the wholes in the back to remove sharp edges.6. Assembly took me about 45min after I laid my parts out. The other reviews are right when it comes to setting up the interior brackets. It’s tight BUT if you flip it on it’s side when installing them, you will not have any problems.It’s a great buy and my wife thanks me for finally making organizing that space. I would definitely recommend to a friend!
Jessica Yanefski
2025-07-09 21:16:11
Great little rack lots of ventalation, easily customizable fits in a closet nice and tight. highly recomend.
Dean and Ronny
2025-07-04 18:30:07
The unit is sturdy, looks good, and does the job.One problem it has is the stiffeners on the top and bottom of the unit, they do not allow you to put anything in the U1 and U6 slots. I managed to turn the one on top (U6) around, so I could put in one of my switches, the lower (U1) slot I put in a PDU outlet strip, it sticks out a little on the bottom, but it is not a huge problem.The supports are just engineered badly by someone that has never obviously installed anything into these before.
Daniel
2025-06-25 10:21:51
I like Vevor. I’ve purchased other tools from them! They actually make a great chamber vacuum sealer that I own.In this case, the network cabinet is pretty great for the price. Thick gauge metal, and easy enough to follow the assembly directions. However, there appears to be a manufacturing quality control problem with this cabinet.In the picture, you’ll notice that the paint or powder coat appears to pool in the corners of the bottom and top housing. This makes it impossible to slide the left and right side panels into place. I had to use a multitool to cut out the excess dried paint from the corners. It’s an easy enough fix. Then just hit it with a little spray paint if you are concerned about exposed metal.Overall I give it 3 out of 5 stars for the trouble. Really a nice cabinet and overall a good quality product considering how inexpensive Vevor is.
Dave M.
2025-06-22 15:34:07
Heavy gauge metal, built solid. Total exceeded expectation.
Dakota
2025-06-04 15:30:34
Pros: The instructions are easy to follow and put together. At the price point it's probably one of the best budget options.Cons: Two plastic latches for the side doors arrived smashed to pieces and unusable. One corner of the top cover was bent in a way where it fits just fine, but the screw holes to attach to the front are inaccessible. The front door also fits but I have to manually lift the door to get it to close. This could be an issue with the right/left panels and not the door.Obviously this could all be due to Amazon's shipping practices, but they could also have packaged it with more cushion so this could be lessened. At the price point I would probably buy it again, but buyers be aware.
James W.
2025-05-27 11:43:20
The good: all parts present and clearly labeled.The bad: where do I start?- Worst of all: sloppy inside corner welds prevent the side pieces from fitting into the top and bottom, so screw holes don't line up. I had to use an angle grinder and modify the side panels to get them to fit together!- Extensive cosmetic damage from poor packing- Bent, mangled corners and edges- No thread tapping on the screw holes, yet included screws are not self-tapping sheet metal screws; they are normal machine screws- Door glass is glued on crooked in two different axes, so the door doesn't even close properly- Glue residue splattered on the glass required scraping offIf I didn't have an angle grinder handy, I wouldn't have even been able to assemble this. And since I've now modified it, I can't return it. Skip this and spend a little more for something that's made properly.
David
2025-05-07 09:35:32
Can be a little hard to put together. Take your time and ok. Used as a storage for amplifier. Works and made it look great.
paglieta
2025-03-25 16:47:09
Perfekt ist eigentlich für einen Server Schrank.Nutze es aber für mein Morion System. Preis Leistung Top würde es wieder kaufen
Nicola Gentile
2025-01-27 15:32:22
E' arrivato ben confezionato.L'ho subito montato e non ci sono state sorprese con i componenti.Per un buon montaggio meglio utilizzare un avvitatore a batteria.Al momento sono molto soddisfatto.
Recommended Products