Your cart is empty.
Your cart is empty. Specifications
Item Model Number: ZG-E
Net Weight: 36 lbs/16.34 kg
Product Size: 13.4 x 9.8 x 17.7 inch/340 x 250 x 450 mm
Lifting Height without Load: 5.5-17.7 inch/140 mm-450 mm
Working Pressure: 0.8-1.0Mpa
Working Temperature: -76-122℉/-60℃-50℃
Normal Pressure Range: 8 kg/cm²
Package Content
1 x Air Bag Jack
Rambeau85
2025-09-07 15:31:57
Quick services are made possible because of this great tool. Make lifting the vehicles a breeze and this is really easy to use.
Doctor d
2025-09-06 17:17:34
Easy build and works well!
Sparky
2025-09-05 11:16:04
This jack is an excellent idea and saves effort and time when used. It does however, need a couple of improvements. First, I had to properly weld the valve assembly together when it came apart and second, the small air fitting at the handle that feeds the bladder needs to have the hose nipple extended. It's too short to secure the small red hose properly. I had to cut the short nipple end off, drill and tap it so that a small one eighth inch nipple would screw into it.The valve assy came apart due to low amperage when welding so it didn't have any penetration
rickie stich
2025-08-30 18:53:49
easy of use great value
kurt
2025-08-24 09:13:49
I had never had anything but the old bottle jacks or floor jacks before so I was a little skeptical about this but it's very easy to use. It's strong and works good. It has a nice throw in other words from like 5 to 18 in something like that. And it's easy to use. You can put it underneath at many different places on the vehicle. Of course you have to have an air compressor to use but I already had that.I've used it about 10 times so far on a few different vehicles and I really like the ease of use. It's also got a good rating for capacity so I'm pretty happy with that too cuz I have different vehicles from little cars 1 ton dually trucks.
Mitch
2025-08-19 14:48:05
Only downside is I need someone to lift the car a bit to slide it under, but that’s no fault to this product. Works as expected, easy to use, and is built so it can be stored upright against a wall to save space. Used it a few times already and it continues to work as expected. Great addition to weekend mechanics garage.
Brian
2025-08-16 15:55:34
There is a lot of lift in this Air Jack!!
James
2025-08-11 16:16:28
This is a little wider than I expected. It leaves limited room for a jack stand next to it. When lifting with this, it leans to the side a little. I question the ability to lift the rated 6,000 pounds. I am curious how much air pressure would be needed for that. It does lift one side of a Jeep as-is with 120psi. It is convenient to not need to pump a jack handle to lift a car. I'll use this jack until it breaks. I would not buy another.
Tomas Eriksson
2025-08-04 10:02:58
Mkt bra grej, lyfter högt och stabilt
Scott
2025-08-02 17:34:27
It came well packaged and assembly was pretty straight forward. Once assembled, I tested it by lifting the rear of my Toyota Rav4 and it lifted it with no issues and seemed quite stable. Better than my rolling floor jack for certain. The air valves worked fine, no leaks and held properly. I have jack stands to put in place on the pinch welds in the even the jack fails which I don't think will happen but never trust any jack and always have a second method to hold up the vehicle in the event of failure. Also make sure you chock the wheels but with this jack, the jack does not roll so less issues with the vehicle moving and the top of the jack's surface is a decent size compared to my floor jack. Looking forward to the summer tire change now.
Paul
2025-07-26 18:35:19
Thought the price was very reasonable.Seems well made.My only concern is that the rubber air bag will not perish over time.
Kes
2025-06-27 14:14:05
Den är användbar till många lyft
JF
2025-06-25 14:36:51
A bit wobbly at full extension but works very well. Pleased with the purchase.
Rambeau85
2025-06-11 17:51:22
Quick services are made possible because of this great tool. Make lifting the vehicles a breeze and this is really easy to use.
Doctor d
2025-06-07 18:21:23
Easy build and works well!
Sparky
2025-06-06 15:54:10
This jack is an excellent idea and saves effort and time when used. It does however, need a couple of improvements. First, I had to properly weld the valve assembly together when it came apart and second, the small air fitting at the handle that feeds the bladder needs to have the hose nipple extended. It's too short to secure the small red hose properly. I had to cut the short nipple end off, drill and tap it so that a small one eighth inch nipple would screw into it.The valve assy came apart due to low amperage when welding so it didn't have any penetration
rickie stich
2025-05-04 18:05:55
easy of use great value
kurt
2025-04-28 16:09:21
I had never had anything but the old bottle jacks or floor jacks before so I was a little skeptical about this but it's very easy to use. It's strong and works good. It has a nice throw in other words from like 5 to 18 in something like that. And it's easy to use. You can put it underneath at many different places on the vehicle. Of course you have to have an air compressor to use but I already had that.I've used it about 10 times so far on a few different vehicles and I really like the ease of use. It's also got a good rating for capacity so I'm pretty happy with that too cuz I have different vehicles from little cars 1 ton dually trucks.
Mitch
2025-04-19 11:20:22
Only downside is I need someone to lift the car a bit to slide it under, but that’s no fault to this product. Works as expected, easy to use, and is built so it can be stored upright against a wall to save space. Used it a few times already and it continues to work as expected. Great addition to weekend mechanics garage.
Brian
2025-04-04 14:23:15
There is a lot of lift in this Air Jack!!
James
2025-03-28 17:37:06
This is a little wider than I expected. It leaves limited room for a jack stand next to it. When lifting with this, it leans to the side a little. I question the ability to lift the rated 6,000 pounds. I am curious how much air pressure would be needed for that. It does lift one side of a Jeep as-is with 120psi. It is convenient to not need to pump a jack handle to lift a car. I'll use this jack until it breaks. I would not buy another.
Tomas Eriksson
2025-03-22 10:41:40
Mkt bra grej, lyfter högt och stabilt
Scott
2025-03-09 12:51:43
It came well packaged and assembly was pretty straight forward. Once assembled, I tested it by lifting the rear of my Toyota Rav4 and it lifted it with no issues and seemed quite stable. Better than my rolling floor jack for certain. The air valves worked fine, no leaks and held properly. I have jack stands to put in place on the pinch welds in the even the jack fails which I don't think will happen but never trust any jack and always have a second method to hold up the vehicle in the event of failure. Also make sure you chock the wheels but with this jack, the jack does not roll so less issues with the vehicle moving and the top of the jack's surface is a decent size compared to my floor jack. Looking forward to the summer tire change now.
Paul
2025-02-28 17:58:01
Thought the price was very reasonable.Seems well made.My only concern is that the rubber air bag will not perish over time.
Kes
2025-02-27 18:04:35
Den är användbar till många lyft
JF
2025-02-15 13:12:15
A bit wobbly at full extension but works very well. Pleased with the purchase.
Recommended Products
