Your cart is empty.
Your cart is empty.The world's best stud finder has now gotten even better! Walabot DIY 2 finds the center of wood and metal studs, detects and tracks the paths of pipes and wires, and can even show movement within walls, making it ideal for exterminators. Walabot DIY 2 is designed for everyone from home improvement novices to professional contractors, electricians, plumbers, and carpenters - everyone in need of advanced wall imaging capabilities.
Happy mom!
2025-06-22 16:37:46
This Walabot is the bomb! I have used so many different kinds of stud finders over the years with marginal success. My toolbox is full of them! With previous stud finders I would have to drill several small holes in the vicinity of an indication and finally find (sometimes not find) the stud. I figured That if the Walabot worked it would be well worth the money. I tested it at home on a piece of drywall and studs I put together in the garage. It worked great. I then tested it in my house (recently built) where I know where studs are. It worked perfectly. Now the real test. I went to hang a TV at my daughters house that is over a hundred years old and has been renovated numerous times so Lord knows where studs are. I calibrated my Walabot and immediately it started showing studs and wires. We marked them, drilled small holes at the marks and low and behold, we hit studs first try! Amazing! This Walabot is worth every penny!
justin
2025-06-01 15:54:48
For years I did the old bang on the wall or tape measure trick and hope I find something to start with. Also try not to hit a wire or plumbing. This tool takes all that away. It made me money on the second job I used it on. Love how i call it a x-ray hand held tool for all people in the trades and homeowners.
Jason Smith
2025-05-06 16:17:19
I ordered this in hopes that the ads I've been bombarded with are true, but this is an absolute waste of money. When mounting shelves I've accidentally hit power, that's a lesson you learn once and it sticks. I have several stud finders now that all work great for detecting studs but not so great at finding power that might be running alongside or in between. I hoped this would help. It does not. I went around my entire office 12' x 12' and it couldn't detect a single stud or tell me where known power and communications lines ran. There's nothing special about my home. I'm in Texas, it's drywall and 2x4 and some pink insulation on exterior walls. It has the best chance of success here. It failed miserably. This thing is going to scratch your walls too. It does not glide across a textured wall. Even if this was $25 it's not worth it. The cheapest stud finder at Lowes or Home Depot is better than this. Scan a wall wait 10 minutes go back to the same wall and scan again and you will get false positives in different spots. I could deal with some false positives if it consistently gave me stud locations. I hate to be so critical about a product but there's no way this has been QA'd in real homes. Possibly a mobile home with thin wood paneling but not a traditionally constructed home. This is absolutely NOT ready for market.
BL
2025-04-30 17:18:12
When I first got my Walabot 2, I could not wait to try outThe visual stud finder feature to see just how good itwas at finding and displaying the studs through post50s wallboard as per accompanying Walabot 2 instructions.So I put up a 2‘ x 2‘ piece of wallboard in the garage whereto 2†x 4†studs crossed and extend it from behind thewallboard. I found setup, and calibration was very easy.After charging, I was ready to begin scanning the pieceof wallboard I had nailed up with the walabot 2.As I move the Walabot 2 over the area of the wallboardwhere the stud was located, the image appeared on mydisplay. The demarcation lines helped to locate the studcenter. I found it to be very accurate. The imaging studfinding feature is definitely a keeper.There’s another mode on the Walabot 2.Which displays a real-time thermal image of what’s inside the wall.Which is a very cool and handy feature, I have no personal use forit at this time. However I am happily secure in the knowledge thatwhen that time comes, I already have my Wallabot 2 and couldn’tbe more satisfied. A very useful device.
Sarge
2025-04-10 09:26:20
This product is advertised as being able to see through drywall.That appears to be true, although I haven't seen quite the same stunning accuracy that the videos showed.Unfortunately, most of my house is lath (plaster on wood lattice) and it's like lead to Superman's x-ray vision. Product is not so effective there. Not as useful to me as I had hoped.Be warned, and be wary of what material you are using it on.
Larry Watkins
2025-03-17 15:45:09
I've been looking at the Walabot for a long time and was disappointed that it didn't work with Apple phones. Then, along came the Walabot DIY 2 and that changed. So I went to Amazon's site only to find it "currently unavailable". Another disappointment. But I went ahead and ordered it with a 2-3 month delivery window. Much to my (pleasant) surprise, it shipped in 4 days and was in my hands within 2 weeks. Happy, happy, happy. It works *exactly* as it shows in all the videos. So much more accurate for not just studs, but for electrical and plumbing lines in the wall. I used it to hang an 8' barn door rail that needed a lot of support for the weight of the door and the pre-drilled holes just didn't line up. I *had* to hit the studs dead center so I would get maximum support. Walabot DIY 2 gave me the accurate picture of where the studs actually were and I was able to place alternate mounting holes on the rail that hit the studs just right. If I could do chin-ups, I could use this rail for them. Couldn't have done it without my Walabot DIY 2.
Lidia Maria
2025-03-06 15:20:05
Love this product. Bought it for my project and it works perfect! Super easy to install and use. Thank you! :)
Dan McKinney
2024-12-28 10:20:16
I use this to inspect homes as a Realtor. Read all the positive and negative remarks and decided I’d purchase it. It’s a keeper. Yes, you must calibrate it with each new area, but that makes sense. What you need to realize is you can now see behind walls!!! This is amazing. Expert mode shows heat signatures like my thermal cameras but behind the wall. When your looking for the metal vault hidden behind the wall this will your go to device.
Francisco Juarez Avila
2024-12-27 18:26:20
El producto no funciona según como lo venden, aparecen tuberÃas donde no existen, y no marca ninguna donde deberÃa haber. Por más tutoriales que vi, nunca dio los resultados correctos. Al parecer le cuesta trabajar sobre concreto y me confunde Madera con PVC.Malgasté mi dinero
Recommended Products
