Your cart is empty.
Your cart is empty.From the Manufacturer
The Master Workbench Metal Pegboard organizer kit offers over 21 square feet of storage space and an all-steel construction that will not warp, fray or crack. The patented double offset hook engagement improves hook stability securing any variety of tool or job aid and prevents hooks from falling out of their slot when tools are removed. The metal pegboard's attractive, scratch resistant, baked-on powder coat finish wipes clean for long-lasting aesthetic appeal for any shop or work area. These metal pegboard panels are magnetic and accept wall control hooks, brackets, and shelves as well as traditional standard 1/4" pegboard pegs. This kit includes: (6) combo metal pegboard panels 32" x 16" (covers 32" x 96") (1) 9" shelf assembly (2) shelf dividers (for 9" shelf) (1) 6" shelf assembly (5) bin holder assemblies (total 15 bins) (1) 4" shelf / dowel rod assembly (holds paper towel, rolls of tape, spools of wire, etc) (1) can holder assembly (holds 4 cans) (2) screwdriver holder assemblies (holds 6) (2) handle hangers, 1 1/4" (for handled tools, hammers, flashlight, etc) (2) c-brackets, 1" x 1" (2) c-brackets, 2" x 2" (2) u-hooks, 3" reach (12) basic hooks (4) medium hooks
khpro
2025-09-05 20:57:36
This thing has and can do it all, super customizable, magnetic, neat, and sturdy. This is my favorite aspect of my shop. I had a galvanized panel for 4 years and finally just upgraded to this big kit for the other side of my shop. Love it. Very well made, color is not as in your face as I thought (red) it’s very nice. Fit perfectly where I needed it. Sized perfectly where I was running out of ideas of things to hang.
IAMRAMEKIN
2025-08-23 17:14:03
This arrived today in a fairly heavy box. Instead of procrastinating, I decided to set it up right away. Make sure you have a power drill, or your life will be pain. Used a stud finder to mount as many as possible on the studs, I think I ended up using a few of the drywall mounts, but not a lot. My garage must have an odd stud arrangement. Regardless, some of the panels were a little bit bent on the corners. At first I was really upset and thought I'd have to get it switched out, but as the screws went in, the metal straightened out. The spray paint can shelf was slightly bent, but nothing that I couldn't fix with my bare hands. I almost wish the spray paint can shelf was just another shelf, but whatever, it's kind of nice to have and I actually found a can to stick up there while cleaning out the garage. I was able to mount the entire thing by myself, but it would have been nice to have someone help hold the panel while I used a level to get it straight. Once the first one is up, the rest are cake. It would be nice if they included more mounts as I ran out. I had a few that I used from an old wooden pegboard and they fit in the holes just fine. All in all I'm glad I bought it. It's very sturdy and not going anywhere. Was it worth the price? Well, I guess that's a relative question... I think it could have been cheaper, but, It's better than the pegboards. Plus, most of the pegboards that are sold on Amazon don't come with any mounts, especially the bin mounts which I ended up using the most. I wish they included some blank labels to be able to stick on the front of the bins too...
Michael MacDonald
2025-08-16 12:17:05
This is a solid product. Literally. My old house came with flimsy particleboard pegboards behind the workbench. They got the job done, but they didn't look very nice, and some of the holes were worn/warped due to the weight of tools hanging there. My new house had no workbench, and when I got tired enough of hunting through boxes on shelves for my tools I decided to build my own. After extensive research I came upon this pegboard kit and ordered without hesitation. I was not disappointed. I mounted horizontal furring strips to the walls above my workbench (another review) and then attached the pegboard panels to the strips. Easy and sturdy.The included organizational items are all nice (I particularly like the paper towel dispenser and spray can holders). My old pegs also work fine in the new system, although the little plastic hold-down clips don't fit. As long as I'm not yanking tools off of the board this isn't a problem.All in all, a great choice for a nice looking and sturdy addition to your shop/workbench.
CrazyCarl
2025-07-20 10:31:28
After years of "where is that tool" I decided to get organized. I have used old style pegboard in the past but dislike it, as the pegs never stay in place, not matter what type or brand you use. These are solid and the hangers can be adjusted to hold firmly in place after putting them on the boards. Lots of versatility with additional clips or shelves.
Steve H
2025-07-16 18:26:45
Let me start by making 2 points.1)I'm pretty rough on my tools. "Bull in a china shop" kinda thing.2)Because if that, I typically make a lot of my own stuff because "nobody can build it like I can"...UNTIL NOW. I have a faintly small workspace, so maximizing every inch is super important. I was looking for something one day, and realized that I was wasting lots and lots of time searching through "I'll just put this here for nows", and little pockets of clutter every time I needed something. While clearing out some of that clutter and making changes to my shop, I realized I needed to better use the wall space. First considered new pegboard arrangement, but while studying my current setup (which was pegboard) I realized that wasn't going to get it done. Off to Amazon.com. I don't remember what I searched for, but I stumbled upon Wall Control. First, a 2-panel kit for around $35. Then, one of their larger kits and I was very interested, so I added that to my cart, and started adding in accessories as well. The m I stumbled across this kit, and that was it. It just made sense. I ordered it on the spot. I happened to be home when the package arrived and immediately opened it. Well packaged, and VERY well made. This thing it incredible. I was able to clear any and all tools from my workbench that previously had nowhere to go, part of my cabinet, my old pegboard, and all of my cordless tools, battery packs, and 2 chargers. All on the Wall Control. All within sight and within reach, and all safe and secure because of how well designed and built this thing is. The hooks provided REALLY lock in there. Even when I want to move them, it's not easy. I am tough to please, let alone impress when it comes to tools, equipment, etc. this system is incredible, and I'm going back to buy some more accessories. More hooks and shelving that goes on here.
Adam Raff
2025-07-06 20:40:59
I love it, once up very easy to setup. I could use there system or use a normal peg board system for hangers. I am still moving and shifting things around. They have a good selection of hangers to choose from.
Customer
2025-06-29 21:41:56
Very impressed - definitely more costly than getting MDF pegboard panels from you local home store but well worth it when done. Used most of the provided hooks but the real advantage is that you can put magnetic organizers on it for sockets, wrenches, screwdrivers, etc. I would recommend getting it on as many studs as possible - mine was pre-planned with a shop renovation so every lag is in a 2x4. I’d be very reluctant & nervous to have that much weight hanging on Sheetrock anchors. Good looking product & well made
CFernandez
2025-06-27 12:32:44
Me gustó que encontré algo complicado de encontrar en otros lados, a un precio razonable que aunque el envÃo fué costoso por el peso, salió a un precio similar a productos que no me convencian.
Lordkifar
2025-06-20 16:02:16
This has been the single best purchase I have made...My tools are all nicely organized and out of harm's way. Easy accessibility and aesthetically pleasing.
Dale C.
2025-05-02 11:56:37
This pegboard system is a solid design and is made of quality materials. It can be somewhat challenging to install if you are screwing into studs that are not spaced right on 16 inch centres, but it can certainly be done. If you appreciate products that are durable and precisely made then you will really appreciate the value of this product.
Marquis
2024-12-31 18:33:16
Article conforme à sa description sur Amazon.ca. Date de livraison respectée par le vendeur. Très solide. Facile d'installation. Je suis très satisfait par cet article.
Scott N.
2024-12-25 10:48:59
Quality
Recommended Products
$32.41
$ 13 .99 $13.99
$215.00
$ 99 .00 $99.00