Your cart is empty.
Your cart is empty.Product Description
Aluminum (Al) Water Heater Anode Rod
Why is this product for you?
Water heater anode rod prolong the heater’s lifespan. The 44-inch flexible segmented design can be installed even in water tanks in narrow spaces.
Compatible Brands
D. Feltz
2025-09-04 19:09:50
Guys,Check your anode rod... almost nobody does it, and then you need to start saving for a replacement water heater and the subsequent install. My anode rod was just corroded to nothing... removing the old rod took a cheater bar on a 1 1/6" socket to remove it... and since it was corroded to nothing, the inner support rod bends pretty easily so I was able to remove the old one. The new one installs pretty dang easily! I really like that there are 4 sections of rod supported by a cable that allows for installs in limited head room basements. Build Quality was great. Main thing to check is that you have a socket to fit on the old anode rod, if not, you'll need one to do the job. Definitely worth spending this money versus buying a whole new water heater! No smell with my install, so that is great and seems to be working well. Certainly a great value considering the alternative.
Steven Y.
2025-08-12 14:26:07
It was easy to install once I got the old one out where there was nothing left of it. I guess I should’ve changed it at five years will but will buy again from the seller great product.
Customer
2025-08-01 11:59:56
Installed in 15 minutes into a 40 gallon water heater. No issues and took care of the smelly water issue.
Timothy
2025-07-26 12:09:45
Easy install and quality made.
Mr.BLB
2025-07-23 12:49:12
It's funny how the water heater companies dont use these to begin with but i know, its them just thinking of themselves and not thinking about the home owner. I replaced my parents and obviously had to cut the old one out as most basements dont have 3 ft of ceiling clearance, so this is a great product. price was also good! there are some that do not use the "rope" design which is not good, stick with these or something with the same design!
B. Schwan
2025-07-22 14:04:33
Have a 10 gallon water heater for a small living quarter that is on well water.The original anode rod was gone within 2.5 years replaced it with the same part number and it slowly got a stronger smell to the point I couldn't take it.Didnt realize there were different rods for diff types or water.Only used 2 of the liinks for my small heater. Was able to separate the other 2 by separating the cable from the clamp with a vice.Will use the other two links when this rod depletes.Smell cleared up in less than 24 hrs. I did drain the tank when installing the new rod.Quality product.
daltonknox
2025-07-15 11:57:10
I like the idea of stainless steel cable. I used this to replace a rod whose cable had rusted through at the top.
badyoga
2025-07-14 16:31:46
But I never could use it because I couldn’t get the other rod bolt unlocked, couldn’t get it with an impact wrench, a torque wrench, stuck with the old one till it rots out completely and then I’ll get water heater repair to install this one
Westman Specialty Contracting
2025-07-13 10:15:27
Simple install
BAM
2025-07-12 14:41:28
My hot water no longer smells like rotten eggs.
Keith Frank
2025-07-10 13:19:30
It’s good in my water heater stops to tank from being ate out
D. Feltz
2025-06-20 13:17:47
Guys,Check your anode rod... almost nobody does it, and then you need to start saving for a replacement water heater and the subsequent install. My anode rod was just corroded to nothing... removing the old rod took a cheater bar on a 1 1/6" socket to remove it... and since it was corroded to nothing, the inner support rod bends pretty easily so I was able to remove the old one. The new one installs pretty dang easily! I really like that there are 4 sections of rod supported by a cable that allows for installs in limited head room basements. Build Quality was great. Main thing to check is that you have a socket to fit on the old anode rod, if not, you'll need one to do the job. Definitely worth spending this money versus buying a whole new water heater! No smell with my install, so that is great and seems to be working well. Certainly a great value considering the alternative.
Steven Y.
2025-06-01 15:23:15
It was easy to install once I got the old one out where there was nothing left of it. I guess I should’ve changed it at five years will but will buy again from the seller great product.
Customer
2025-05-29 17:23:59
Installed in 15 minutes into a 40 gallon water heater. No issues and took care of the smelly water issue.
Timothy
2025-05-27 12:29:07
Easy install and quality made.
Mr.BLB
2025-05-20 18:13:58
It's funny how the water heater companies dont use these to begin with but i know, its them just thinking of themselves and not thinking about the home owner. I replaced my parents and obviously had to cut the old one out as most basements dont have 3 ft of ceiling clearance, so this is a great product. price was also good! there are some that do not use the "rope" design which is not good, stick with these or something with the same design!
B. Schwan
2025-04-15 12:36:25
Have a 10 gallon water heater for a small living quarter that is on well water.The original anode rod was gone within 2.5 years replaced it with the same part number and it slowly got a stronger smell to the point I couldn't take it.Didnt realize there were different rods for diff types or water.Only used 2 of the liinks for my small heater. Was able to separate the other 2 by separating the cable from the clamp with a vice.Will use the other two links when this rod depletes.Smell cleared up in less than 24 hrs. I did drain the tank when installing the new rod.Quality product.
daltonknox
2025-03-31 17:36:54
I like the idea of stainless steel cable. I used this to replace a rod whose cable had rusted through at the top.
badyoga
2025-03-12 13:22:43
But I never could use it because I couldn’t get the other rod bolt unlocked, couldn’t get it with an impact wrench, a torque wrench, stuck with the old one till it rots out completely and then I’ll get water heater repair to install this one
Westman Specialty Contracting
2025-03-07 14:34:15
Simple install
BAM
2025-03-06 12:16:06
My hot water no longer smells like rotten eggs.
Keith Frank
2025-01-29 13:28:29
It’s good in my water heater stops to tank from being ate out
Recommended Products