Your cart is empty.
Your cart is empty.
The diesel heater glow plug kit is a direct replacement for your parking heater, which is a perfect fit for nearly all all diesel heaters available on the market.
Features:
Premium Material
-The diesel heater glow plug kit is made of ceramic, plastic and metal, which has the characteristics of small volume and light weight.
Fuel Savings
-This bunk heater glow plug can enhance fuel combustion efficiency for improved heater output and reduced emissions.
Good Workability
-The parking heater glow plug has stable starting performance in cold conditions, so you don't have to worry about the diesel heater fails to start in low temperature conditions.
Specifications:
Material: ceramic, plastic and metal
Length: approx. 26.3 cm(10.4 inches)
The size of ceramic rod: approx. 4.5x0.4cm (1.8x0.2 inch) (lxd)
Diameter of thread: Approx. 1cm(0.4 inch)
Package content:
1 x diesel parking heater glow plug
1 x Removal Fitting Tool
Michael O.
2025-08-30 13:07:05
Easy to change with the tool that cane with it
Brandon
2025-08-10 17:39:47
Extremely slow shipping.
Scootr
2025-07-21 18:00:43
I have a Vevor Chinese diesel heater. The pump and the glow plug needed replacement after a year. This unit works good and replacement is simple using you tube video.
Ricky S.
2025-07-19 13:50:01
It fit and worked well
John Bostwick
2025-07-18 16:02:14
Easy install, works great.
Mr68K
2025-06-26 10:28:09
The media could not be loaded.
Peter
2025-05-27 16:10:12
I got this as a back up to my two diesel heaters and have not needed it yet. BUT..... since it will be a backup part for backcountry truck camping I thought it best to test and inspect it to make sure it WILL WORK when I need.Since this operates on a 12v system, I simply attached it to a power source............ and trust me, you will know if it's working or not, and it does. I also inspected the connectors, etc... and everything is well made. I expect no issues with the plug when I need it to work.Highly Recommended.
Roberto
2025-05-21 14:00:09
Purchased this as spare for a long trip in the middle of no where. I hope I never have to use it, and if I ever do, hope it works. For now, all I can say is that it looks like the one my unit came with and the added tool to remove the glow plus is nice bonus. 5 stars, will update if that changes.
Brent Bauer
2025-03-28 11:30:53
After repairing it before installing it....sheeshit is working well.Yellow wire was not crimped/attached properly.
Travel bug
2025-03-18 12:04:05
Glow plugs are some of the first things to fail on these cheap diesel heaters (which in general are GREAT!). Having a spare around for when it fails is critical if you depend on this heater for anything important.This particular glow plug fits my VeVor diesel heater. I just did a fit test, but I am keeping it as my spare so I can't say how long it will last. They are pretty much all commodity items so as long as it fits, it should work fine. The removal tool is a nice touch because removing the old glow plug could be a pain if you didn't have the right tools or this specialty tool.
Kevin Malley
2025-03-17 11:44:12
I used this glow plug on a 5KW Diesel Heater. The machine was failing with a E-8 error code caused by a plugged atomizing screen. The original glow plug was caked with soot from failing to ignite, while likely still good I opted to replace the plug at the same time as the screen as a preventative good measure.This plug works as good as the original and looks identical, from size to wire colors and length.The tool on the other hand is a poor excuse of a tool and was unusable in it's delivered form, full of sharp burs one of which would have cut any wires that touched it and the other preventing the use of a rod to turn the tool. In addition to the poor machining the tool did not fit onto the plug very well, it was a bit too tight and required the persuasion of a light hammer to seat it onto the plug nut.The sellers photos incorrectly show the plug with two green wires I received a plug with one green and one yellow which as mentioned matches my original and all other glow plugs I have seen for these heaters.While I may have received a bad tool, (I'd be surprised if they are all this bad) the most important thing the glow plug worked as expected. That said I mentioned the atomizing screen was plugged on my unit there are kits that include the screen, plug and tool at the same or better pricing (at time of review), These kits along with others that include gaskets may be another possibly better option depending on your needs.
Customer
2024-12-30 13:36:15
Came fast, packaged well, good pricing and fits just like it should.This should be a drop in replacement for any of the Webatso clone diesel heaters out there. Worked for me. Zero complaints.5-Stars!
Science Guy
2024-12-24 11:09:50
I received this product through the Amazon Vine program.This WAYSKA Diesel Heater Glow Plug with Removal Fitting Tool is something I needed to pickup. I have had a heater glow plug go out on me at the most inconvenient time and always like to keep a spare on hand. The part has not been installed yet, but it seems to be the exact one that came with my VEVOR 8KW model XMZ-L-D4. The electrical connections are solid and well done and the plug has no cracks or any visible flaws. I really like that they included the specialized removal tool because it's easy to damage these plugs if you use the wrong tool. The price also seems quite reasonable. I think I can safely recommend this product, but I will update this review if fails to perform properly.
Recommended Products
