Your cart is empty.
Your cart is empty.Product Description
Motor body size:52.7mmx35.6mm/2inx1.4in
D-shaft size:3.1mmx16.3mm/0.125inx0.64in
The white connect cord:55cm/21.6in
The black connect cord:20cm/7.8in
Rotation direction: the motor looks down at the top of the blade.
Usage method:Just connect the fan to the motor switch, then connect the switch to RV, make sure the wires are black to black and connect the other wires together, pull the central part of the blade down the shaft and push the blade central hub back to the new motor shaft.
24JonnyJ
2025-08-04 10:35:53
Quality product.Installed in a 2009 Cross Roads Cruiser 5th wheel travel trailer.Removed trim ring and screen to access fan and wiring. All work could be performed inside the trailer. Removed wire nut from fan/fan switch and threw it in the garbage. Removed fan blade, removed screws retaining fan motor and removed switch. Cut white wire leaving sufficient length for new fan installation.Removed the components and compared to new. Everything looked close.Great time to clean plastic trim piece and screen while removed.New Fan fit perfectly with screw holes alignment.Switch hole in plastic screen assy required a little adjustment. I enlarged the hole and pulled it away from the edge so the retaining nut would fit without obstruction. I used a butane soldering iron to modify the hole until a perfect fitment.I used automotive waterproof butt connectors ensuring a permanent wire splices.Secured fan wires using supplied wire ties.Pay attention to fan blade installation ensuring fan blows air outside. Blade has instructions written on it.Performed operational check of the new fan before screen and frame reinstalled.Reinstalled plastic screen and trim frame assy with extreme care not over tightening screws. Older plastic interior pieces are very brittle and fragile.Whole process took maybe an hour and that included chasing required tools.#1 Phillips screw driverWire cuttersWire crimpersMeans to modify switch hole if needed.I found reading the reviews, my vintage rv fan fitment was nearly identical. It worked well for me.Fan works so much better than original. Quieter than original. Moves a lot more air. Very happy with product
Greg Nidel
2025-07-24 13:05:20
The rv bathroom fan is more quiet and more powerful than the old one and was easy to install. I had to drill holes in the bracket since this fan motor is larger. I'm very pleased with it and I would recommend it.
Patrick lambert
2025-07-03 18:10:29
Perfect replacement. Everything lined up. Includes a switch you will definitely want to use.
Dan
2025-06-08 15:06:38
Our vent motor started making a lot of noise so I went online and found a replacement. I didn't expect it to work so perfectly, but it did. The replacement was exactly like the original. The replacement motor even came with a new fan blade and I'm glad it did because upon removal I discovered that the original was worn and damaged.
AnnaLee
2025-05-22 13:02:28
The media could not be loaded.
nvgoosehntr
2025-04-25 20:36:57
Motor worked ok but fan blade did not clear between the motor mount and screen. Maybe because flat on motor didn't go completely up the shaft and I cracked the blade trying to push up farther. Switch wires were also too short for my setup. Replaced fan blade and added wire now it works great.
Tommy C
2025-04-19 18:15:37
This is a good kit as it comes with everything you need. The motor and the fan are quieter that the original equipment and move just as much air. The wiring is the correct length for my 2003 Coachman Class C and everything fits perfectly.
Robert F.
2025-02-20 18:23:26
It was easy to install and works perfectly. It is a little bit noisy, however
Steve Van Velzen
2025-02-02 18:55:04
This works good and fits perfectly
Jeffrey
2025-01-25 09:15:57
Very good ðŸ‘
Rick
2025-01-06 16:22:58
I had to replace the fan on my RV vent hood. This item fit perfectly, no hassle.
Peter
2024-11-30 13:56:37
Got three of these for my portable restroom business and they work great. Plug and play.
Ariel Von Richter
2024-11-12 18:36:38
I looked around at all the reviews and chose this one worried about whether it would fit. I really only needed the motor, but the fan included is nice. Both fit well! Works great! We have a ‘94 chateau and it’s perfect. Took 20 mins to replace.
Recommended Products