Your cart is empty.
Your cart is empty.Product Description
Wood Burning Made Easy - SUIUBUY Wood Burning Pen - How To Use ?
- PREP WOOD SURFACE - Use hardwood blocks (high density without leakage), prep the surface with sandpaper (least 220 grit)
- SUCK DRY NIB INK - Shake your scorch pen, press the refill until the refill is saturated and the ink flows out (Use paper towels to dry the nib ink)
- APPLY YOUR DESIGN - Draw your design either with a stencil or free hand (Apply a shallow layer of ink to the design)
- KEEP HEAT SOURCE MOVING - Heat with a heat gun of 1500 watts or more (460°F or more) , until the desired effect is achieved
- SEAL AND PROTECT THE FINISHED DIY WORK - Use oil-based coating, make the work never fade
Eva Collins
2025-09-01 17:53:31
This works so much easier
todd 🛡
2025-08-25 12:17:58
Great tool to sign a name to wooden projects.
Kacie
2025-08-14 18:40:55
Definitely does the job. I do feel like it bleeds quite a bit, but it's easily sanded off.
Rachel King
2025-08-09 18:49:26
The media could not be loaded.
Nursing Life
2025-07-15 13:23:58
Ok so, this could have totally been user error on my part. The markers do work like the description states and they are not terribly hard to use. I don't feel like it gives a truly wood burnt look though and the bleed through is awful. But like I said at the beginning, it could have been the stencil I used. So no blame to the seller at all. I plan to practice some more with them and see how it goes. I will then update further.
john
2025-07-14 15:30:02
unfortunately, followed instructions but it spreads like a marker into the wood grain and ruins the design, had to re-sand and redraw design, not easy on a one off design. I am sure i can find a use for them just not custom work.
Diane R
2025-07-05 11:27:05
My husband does wood working. He uses this to engrave his name. It’s amazing
Vikki Turpin
2025-06-30 11:08:04
I've seen these types of markers before and was really interested in them so when it became available I had to get them.I have a few different pyrography pens and as fun as they are, sometimes you can get burnt or the smell can get to you.I was excited to try the marker.I tried it out on a small piece just to toy around, get the feel of the marker, each tip is different so I wanted to so how much pressure to use. I did not use a stencil to sample it out, just free hand. The first swipe there was a bit of liquid that came out, my fault for not dabbing it like a paintbrush or gel pen.So before using press down and get the build up out and use paper towelNow using the heat gun was so easy, I'd say it took about 40 seconds before I saw anything and then it really looked like I used a regular pyrography pen. No burnt wood smell eitherOverall I was happy with how it works, will definitely use again
Samantha D.
2025-06-22 16:19:29
I had never used scorch pens before...they worked great... I would definately re-order this product!!!!!
Rami Sakalla
2025-05-15 16:38:27
a bit on the tricky side to know how much of it to use to get a crisp lines. once known, it's great! easy to use, burns perfectly with heat gun and can control shading.Recommended
cassandra ferguson
2025-05-07 12:22:40
I tried these markers in different woods and both bled really bad.
Sambina12230
2025-05-04 10:17:48
Just wasn’t what I needed. And hoped it would work. Might work better on wood as it’s intended use. SmallAmount of fluid. But ok. Stinky
Danielle Boucher
2025-04-30 17:23:12
Finalement ça ne brûle pas le bois mais bien la ligne de crayons donc des qu’une pluie tombe dessus, tout autour devient noir…à ne pas utilisé à l’extérieur et en connaissance de cause sinon c’est tout le même beau!!
Eva Collins
2025-04-12 16:48:47
This works so much easier
todd 🛡
2025-03-08 14:03:54
Great tool to sign a name to wooden projects.
Kacie
2025-03-05 16:29:13
Definitely does the job. I do feel like it bleeds quite a bit, but it's easily sanded off.
Rachel King
2025-03-01 13:49:45
The media could not be loaded.
Nursing Life
2025-02-24 11:28:57
Ok so, this could have totally been user error on my part. The markers do work like the description states and they are not terribly hard to use. I don't feel like it gives a truly wood burnt look though and the bleed through is awful. But like I said at the beginning, it could have been the stencil I used. So no blame to the seller at all. I plan to practice some more with them and see how it goes. I will then update further.
john
2025-02-04 10:35:49
unfortunately, followed instructions but it spreads like a marker into the wood grain and ruins the design, had to re-sand and redraw design, not easy on a one off design. I am sure i can find a use for them just not custom work.
Diane R
2025-01-14 11:18:20
My husband does wood working. He uses this to engrave his name. It’s amazing
Vikki Turpin
2025-01-01 12:12:59
I've seen these types of markers before and was really interested in them so when it became available I had to get them.I have a few different pyrography pens and as fun as they are, sometimes you can get burnt or the smell can get to you.I was excited to try the marker.I tried it out on a small piece just to toy around, get the feel of the marker, each tip is different so I wanted to so how much pressure to use. I did not use a stencil to sample it out, just free hand. The first swipe there was a bit of liquid that came out, my fault for not dabbing it like a paintbrush or gel pen.So before using press down and get the build up out and use paper towelNow using the heat gun was so easy, I'd say it took about 40 seconds before I saw anything and then it really looked like I used a regular pyrography pen. No burnt wood smell eitherOverall I was happy with how it works, will definitely use again
Samantha D.
2024-12-18 10:24:41
I had never used scorch pens before...they worked great... I would definately re-order this product!!!!!
Rami Sakalla
2024-12-02 10:15:52
a bit on the tricky side to know how much of it to use to get a crisp lines. once known, it's great! easy to use, burns perfectly with heat gun and can control shading.Recommended
cassandra ferguson
2024-11-30 18:22:43
I tried these markers in different woods and both bled really bad.
Sambina12230
2024-11-29 13:53:48
Just wasn’t what I needed. And hoped it would work. Might work better on wood as it’s intended use. SmallAmount of fluid. But ok. Stinky
Danielle Boucher
2024-11-24 15:45:42
Finalement ça ne brûle pas le bois mais bien la ligne de crayons donc des qu’une pluie tombe dessus, tout autour devient noir…à ne pas utilisé à l’extérieur et en connaissance de cause sinon c’est tout le même beau!!
Recommended Products