Your cart is empty.
Your cart is empty.New CHUGGER PUMP XCPSS-IN-1 X-Dry with Run Dry Protection is the first pump made by brewers for home brewers like you. Same pump as the CPSS-IN-1 but with Run Dry Carbon Bearing Material. ETL-certified and made with food compliant materials, it’s a premium, sensible, and affordable alternative to expensive March pumps and has 25 percent more power with its 1/20 HP motor. Another benefit is stainless-steel heads that are interchangeable with existing March brand pump motors. This pump is not a self-priming pump - the CHUGGER PUMP head must be flooded with liquid prior to turning on the pump. It has been tested for safety and performance standards. Please check your electrical requirements before placing order. Must be wired by an electrician.
Troy
2025-08-18 13:53:44
This was a replacement wort pump for a March pump that died. Great flow rate and easy prime. Way more flow then the Chugger pump on my hot liquor side, this may be simply because the other one is at least 10 years old or maybe the other one had a lower rating. Anyway pleased with the pump and will order again when I need one.
Customer
2025-07-24 18:05:33
This is the second pump that we have had a problem with and the first one was replaced under our insurance we purchased. We may have to buy the Blichman pump to get the quality we need.
Carl Price
2025-07-14 13:43:03
I used it 1 time and went to brew for the second and the motor would run but the fan wouldn’t turn. Haven’t been able to use it since. I own a brewery and didn’t have time to box it up and send it back so that’s my fault but as far as the pump goes......stay away from it
Melissa
2025-04-11 21:32:57
Best pump I've used so far. the Blichman burned my hand, the Sea Flo leaked out of the box, and the MKII got air lock and burned up the impeller twice ( which may have been my fault). Regardless the new X dry impeller lasts 10X's longer and will not burn up if you accidentally get air lock and are not paying attention during a brew. I am saving up for a CHugger MAX but for now I love this pump for small batches. Thanks Chugger!
Stephan Tjaden
2025-03-12 18:09:15
I’ve used my current chugger pump for the last two years on my 1/3 BBL system and have made plenty of batches to boot. I’ve also used this pump several times to run CIP in my system for up to 35 minutes or so at a time.You can throttle this pump very easily by attaching a valve to the “OUT†port and controlling your flow .I would recommend this pump to anyone and would have no problem using this in up to a 1-Barrel system.
Phil
2025-02-06 13:32:02
Worked for 6 months. And now out of return window.
Trevor S. Schultz
2025-02-01 12:44:40
Extremely disappointed. Lasted about 5 brews.
Recommended Products
