Your cart is empty.
Your cart is empty. Features:
Material: UL approved Nylon PA66(Flammability UL 94V-2) for A.C.F parts EPDM rubber for B.D parts
Features:The claws and seals of excel lent design, sealing nut have a''click''sound and re-open,can hold cable firmly and have a wider cable range.Resistant to salt water,weak acid,alcohol,oil,grease and common solvency
Working temperature:-40°C-100°C in static state,or instantaneous heat resistance up to 120°C;-20°C to 80°C in dynamic state, or instantaneous heat resistance up to 100°C
Waterproof grade: IP68
Inside of each grommet have rubber boot sealing ring to tight the connector, waterproof design. Wide clamping range with strong durable stretching resistance, cause no damage to cables or devices Easy to use: separates the pieces first, run the wire through it, tighten the gland, no need for disassembly Note: Please choose the proper cable glands size for the item passing through
Specifications:
Models: NPT1''
Cable Range:NPT1/4"(0.177-0.315inch), NPT3/8"(0.19-0.39 inch), NPT1/2"(0.23-0.49 inch), NPT3/4"(0.49-0.7 inch), NPT1"(0.66-0.113 inch)
Todd K
2025-09-02 14:18:52
Worked just fine, has wide range of wire size
TheTimeRider
2025-07-18 11:03:22
Returned as too big, but got several smaller versions of the same thing and they work VERY well. These would work well for their size.
IslandBum
2025-07-13 21:38:42
Quality: The strain relief, electrical feedthroughs are water tight and well constructed. The body, lock-nut and sealing-nut are made of durable nylon. The two gaskets are made of rubber.Functionality: The strain relief fits through a standard 1/2" hub electrical gang box and secured with a rubber gasket and nylon lock-nut. The wire feedthrough has a clever design that constricts a rubber gasket as the sealing-nut is tightened.Longevity: Unknown at this time. Longterm, direct sunlight and ozone exposure may degrade the nylon and rubber.The NPT 1/2" unit fits a wire with an outside diameter of 6 to 12.5mm (0.236 to 0.492 inch). In my case, I had a wire with an O.D. of slightly less than 6mm and needed to wrap the wire with several turns of friction tape. For about $10 you receive 10 feedthroughs, which is a good deal in my opinion.
john
2025-06-28 12:41:58
I feel like a pro using these to wire up my electronics. Highly recommend.
Jon, a carpenter & more
2025-05-25 16:02:16
It seals good and does its job wonderfully, highly recommended.
Pool Contractor
2025-05-23 14:17:35
Worked well for 12AWG power cord for pool pump. You must snug up with pliers for tight fit.Plastic seems a bit brittle. Time will tell.Did not need nut as it threaded into port on motor at 1/2"
RPG
2025-05-19 12:20:22
Used this item to install a thermocouple in a livestock waterer. It is fully immersed 100% of the time with NO leaks
LB
2025-05-18 18:36:16
Worked well for a part of my solar system. Does nice job of protecting cables going in/out of the DC busbar junction box.
Larry Horel
2025-05-12 17:57:38
Worked as advertised
Customer
2025-04-29 15:44:25
Beaucoup moins cher que dans les magasins spécialisés. Même qualité.
Earl Jr.
2025-03-25 13:34:48
Keep your external PVC outlets water proof with this cable restraint ...
Selly A.
2025-03-10 13:33:07
I don't normally leave reviews, but this product is amazing. Dimensions given in the description are very accurate. For my application, I needed a cord grip that could fit my battery cables with a snug fit when tightened, while also fitting over the battery lug terminal, which is wider.After paying 3 times the price at my local hardware store, for something that did not accomplish the above, these items saved the day. They are quality made and are compatible with my other conduit conduit fittings of the same width. Fully approved for use in Canada; great price; you can't go wrong.Size purchased - 1"
steve
2025-01-26 17:09:16
Perfect fit!
Recommended Products
