Your cart is empty.
Your cart is empty.
Specification of General Shift Cable:
Housing Diameter: 4mm
Front Shift Cable Length: 1.55m
Rear Shift Cable Length: 2.1m
Color: Black
Material: PVC + Stainless Steel
Specification of Brake Cable:
Housing Diameter: 5mm
Front Shift Cable Length: 1.1m
Rear Shift Cable Length: 1.7m
Color: Black
Material: PVC + Stainless Steel
Package Included:
1 Set Shift Cable
1 Set Brake Cable
Please Note: Adopting double ends bike spools, Keep the required brake tip and cut off the unwanted end, more convenient.
Adrenaline Junkies Bikes
September 6, 2025
For the best quality parts and for the cheapest amount of money possible, this complete wiring kit designed for mountain, road, and hybrid bicycles is the best bang for your hard earned bucks That money can buy.You're going to need a pair of cable and housing cutters for this kit to be completed and professionally installed like a pro. The kit comes complete with gearing lines for front and rear derailleurs as well as both front and rear braking lines. The kit includes two solid pieces of housing, one gauged for gearing, the other thicker one for braking. It also includes all of the housing ferrules and the cable end tab clamps to make a professional quality installation.The housing is simple: measure twice, cut once. Measure out one end what you'll need, make your cut. Utilize the other end for your next piece of housing, measure, and cut. Eventually, your one piece of housing should be enough to do both lines of that kind. (i.e. two gearing housing lines from one housing, two brake housing lines from the thicker housing.)This kit even includes the three donut spacers per line to prevent exposed gearing or brake lines from rubbing and scraping the framework. It's a great kit for the money.You can't go wrong with this kit as long as you have the proper knowledge and tools needed for a proper installation. It's definitely a well assembled kit. Five star quality for a two star price... Can't beat it!
Eric Richard Knutson
July 28, 2025
The media could not be loaded.
Roughdraft214
July 14, 2025
I bought this kit to change the rear derailleur on my old 2013 Diamondback. The original frayed and I considered taking it to a bike shop. Usually these repairs are not expensive but when I noticed how inexpensive the cables were I decided to do it myself and I'm glad I did. The quality seems great there are two derailleur cables and two brake cables. I accidentally cut a brake cable thinking it was a derailleur cable so pay attention to the ends, but that was entirely my fault. Once I had the right cable and fed it through I realized it was a bit too short. So short that if I kept all the outer cables the same length the internal cable would not reach the tightening nut on the derailleur. I ended up taking off about 3 inches from the front outer cable closest to the shifter and about an inch from the rear most outer cable just so the internal cable could reach and even then it was just enough to put back through the tightening bolt and the piece left over was just long enough to crimp. It did make trying to tighten the cable a bit harder, being there was just barely enough cable to work with. I wish the cable would have been at least 4 inches longer, 6 to be on the safe side, but really 8-10 would be best as this cable was too small for a medium sized frame, there's no telling if it were a larger frame. I did have to waste some of the outer cable pieces once I had to recut them after noticing it wouldn't work out but I liked that it came with the outer cables and ends. All good quality, good wire, held together nicely, just too short.
klevay
May 11, 2025
Using this kit I replaced all the rusting cables, shift and brake, in my 15 year old bike. Shift cables and brake cable are different in thickness and have unique endings. Steel reinforced housing is of excellent quality as well. All the cables fit perfectly with Shimano components on my bike and it was very easy job to do. Regular cutting pliers or cable cutters won't give you a clean cut so don't even try. If you don't own special bike cable cutters, the Dremel tool with cut-off blade does an awesome job with cutting both cables and housing without fraying or damage.
Jim and Sue
April 22, 2025
There is plenty of cable and housing length; all pieces seem to be of good quality. Only downside is that cable housing end caps are plastic (most other kits are as well), and those cable housing ends don't fit real well. Shifter housing ends are tight and need a bit of lube to get them to slide on; brake housing ends are loose fitting. But once installed, that looseness is of no consequence.
Matt O’Connell
April 15, 2025
High quality, nicely made set of shift and brake cables. These appear to be just as high quality as any name brand set, not a cheap high volume production run of generic garbage. For the price its hard to beat. This is basically the same as the other set that is branded YAKAMOZ, except it DOES NOT include a nylon sheath which can be used for the shifter cable in areas its exposed on the frame run. The cables are labeled branded with RISK, so that appears to be the brand which a quick google search shows as a most likely Chinese brand. But everything appears high quality, I'd definitely buy again.
PeaceMail
March 31, 2025
Does the job without breaking the bank.
alain
March 22, 2025
excellent
Regie
March 7, 2025
Worked great with Shimano gear.
The Walster
January 4, 2025
One of the shifter cable barrel heads was too small and would not engage with Shimano shifter, resulting in the cable barrel head jamming in the shifter. A barrel head on a genuine Shimano cable is approx 4.4mm, whereas the one that jammed was only 4.04mm. However, this meant I had to buy a genuine replacement for this cable, not making the bundle that good a deal.Brake cables and outer cables were OK, and the package came with cable ends which was appreciated.
larry hardiman
January 2, 2025
its good
Recommended Products
