Your cart is empty.
Your cart is empty.Headgear for YESWELDER welding Helemt : LYG-L500A LYG-M800H LYG-Q800D LYG-S400S
MelissaF79
2025-08-23 11:12:50
I was able to fix my welding helmet with this. I’m so relieved this was good quality as I didn’t want to buy a new helmet. It was easy to assemble, good quality and comfortable.
Used To Care
2025-08-10 13:54:04
Bought a YesWelder helmet, then to get the helmet to stay up between welds, cranked down on the friction knobs so hard I broke the suspension.Fortunately, YesWelder sells the suspension alone for reasonable cost. I then repaired the original suspension with JB Weld plastic putty, so I have a spare.Trick to YesWelder helmets: hinge them all the way up and back. They will catch on a little hook and stay up. If you overtorque the side knobs, it breaks.
Too small
2025-07-25 18:03:54
I like the idea that it fit my helmet with square holes, that is important. Package was a good size, if need be I would order those produce again
Jon Schlarb
2025-05-13 12:24:50
Worked as a repacker for my Deko Pro welding hood. It feels a tad weak but it's an affordable replacement.
flyfish59102
2025-05-10 10:22:42
It is as easy to replace and two thumb screws can make it. I wore out my old YesWelder helmet gear and didn't want to buy a new helmet. This replaced the old one fast and easy. I think this one even had more padding on it than the original. Very comfortable.
Justin Schiltz
2025-04-15 17:56:32
The original that can with my helmet lasted 4 months until one of the tightening pieces stripped out. Bought 3 replacements and 1 already busted on the inside of the tightening knob hasn't even been a month before that happened. However it is very comfortable, but I don't think the affordability is worth how cheap they are built. You'd probably pay in a year more than what you would for a sturdy durable head gear that would probably last longer than the year.
shawn880
2025-03-28 16:32:07
My Viking headgear fell apart and this did the trick. Probably fits as good as the original one from Vulcan.
Aaron
2025-03-07 20:37:09
Cheaply made product. Don't over tighten, will strip out. It will work as a replacement if you strip out the original as i did. It is the same as the original. It is what it is. I'd give it a 2.5 star rating if I could.
NAã€4410
2025-03-05 11:40:22
最åˆã‹ã‚‰é¢ã«ã€ä»˜ã„ã¦å±…ãŸç‰©ã¯ã€æ¾ã‚ŠãŒã€ã‚ã‚Šã¾ã—ãŸãŒã€ãƒ•ã‚£ãƒƒãƒˆæ„ŸãŒã€ã„ã¾ã„ã¡ã§ã€ä½¿ã£ã¦ã„ã¾ã—ãŸãŒã€ãƒ¡ãƒ³ãƒ†ã®ç‚ºã«ã€ã“ã®ãƒ‘ーツをã€è³¼å…¥ï¼å–り付ã‘ã‚‚ã€ok👌後ã‚æ¾ã‚Šã‚’ã€å›žã—ã¦ã€èª¿æ•´ã—ã¦è¦‹ã‚‹ã¨ã€ãƒ•ã‚£ãƒƒãƒˆæ„ŸãŒã€ok👌ã€é¢ã®ã‚°ãƒ©ä»˜ãã‚‚ç„¡ã„ï¼ä½œæ¥ãŒã€ã—ã‚„ã™ãæˆã‚Šã€DIY溶接ãŒã€æ¥½ã—ãã€æˆã‚Šã¾ã—ãŸâ™ª
Jakub Hajek
2025-02-10 14:37:37
I have Miller Digital Infinity helmet for years and although I am happy with the visor and features, the head gear assembly started to fall apart.The original headgear from Miller can take you down about 80 bucks easily for a bit of finicky plastic.Thank you Yes Welder for making this replacement! For 20 bucks a perfect fit inside the helmet assembly holes and very comfortable fit on my head. I would even go as far as saying a bit more comfortable than original Miller head gear. It seems to be a bit more robust too.
Mac
2025-01-20 13:12:20
It was a pain to replace this one with my old one but once I got it fitted into place works good ðŸ‘
Dennis P.
2024-12-31 21:47:30
Purchased this headgear hoping it might fit but no go. This will fit the newer style auto darkening helmets with the larger .656 square(with the 1 little notch). Not saying it cant work with a bunch of mods but not worth it for me.Other than that it felt very good for the amount, and i will install it on my older miller helmet.
Richard Pellerin
2024-11-24 17:31:17
J’ai du travailler pour bien l’installer, pas si universelle que sa
Recommended Products
$180.00
$ 78 .99 $78.99