Your cart is empty.
Your cart is empty.Product Description
Klinger Disney
2025-08-08 15:21:10
works good
MO
2025-08-04 09:44:38
YOU’RE GOING TO BE SO PLEASED WITH ANYTHING YOU WANT TO PLUG AND FINISH!!! Love them so much!!!
BirdBread
2025-07-26 13:59:12
For anyone that's wondering these are definitely metric and not standard/sae/imperial. I had to use a 25/64th drill bit to fit these 10mm/3/8" plugs in a vinyl window.
dan s
2025-07-07 15:06:14
Works great as replacement plugs for alumawood patio. The original get brittle after about 10 years these work great at a reasonable price
CLGOmaha
2025-06-28 16:09:06
I have a Stratocaster with a white pick guard and took off a knob so my hand would have more room . I used one of these to plug the hole that was left. It worked good for that.
Cynthia Barnes
2025-06-24 11:22:07
These are the correct diameter but my screw hole is more shallow so these will not go all the way in.
Garry
2025-06-20 16:54:31
I bought these in black and used them to plug holes in the top of a workbench I am using for a reloading bench. The holes were for attachments for holding things in place you were working on. I did not want powder getting through the holes if there was a spill. I may permanently plug some of the holes later. But I have light wires going through some of the holes for my reloaders. I did file the edge of some of the plugs so the wire would just fit where needed. I most likely will glue wood plugs in all the rest of the holes later. These would be OK to just leave as is, but I will later want to have the bench without the plugs that give high spots in the bench. These plugs do work well for what they are made for.
Susan
2025-06-06 18:40:18
Been looking for something to plug holes in my barn door (they give you stickers). Fit perfectly
RN
2025-05-26 13:18:06
Do not try to force it into a smaller hole, it pops out.
BB
2025-05-17 19:39:00
Did the job!
Lee
2025-05-15 14:42:56
The plugs fit well but look cheap
Klinger Disney
2025-05-14 12:58:07
works good
MO
2025-05-11 16:38:50
YOU’RE GOING TO BE SO PLEASED WITH ANYTHING YOU WANT TO PLUG AND FINISH!!! Love them so much!!!
BirdBread
2025-05-07 09:16:00
For anyone that's wondering these are definitely metric and not standard/sae/imperial. I had to use a 25/64th drill bit to fit these 10mm/3/8" plugs in a vinyl window.
dan s
2025-05-06 19:29:10
Works great as replacement plugs for alumawood patio. The original get brittle after about 10 years these work great at a reasonable price
CLGOmaha
2025-05-01 11:14:34
I have a Stratocaster with a white pick guard and took off a knob so my hand would have more room . I used one of these to plug the hole that was left. It worked good for that.
Cynthia Barnes
2025-04-15 17:44:25
These are the correct diameter but my screw hole is more shallow so these will not go all the way in.
Garry
2025-03-18 15:34:24
I bought these in black and used them to plug holes in the top of a workbench I am using for a reloading bench. The holes were for attachments for holding things in place you were working on. I did not want powder getting through the holes if there was a spill. I may permanently plug some of the holes later. But I have light wires going through some of the holes for my reloaders. I did file the edge of some of the plugs so the wire would just fit where needed. I most likely will glue wood plugs in all the rest of the holes later. These would be OK to just leave as is, but I will later want to have the bench without the plugs that give high spots in the bench. These plugs do work well for what they are made for.
Susan
2025-03-07 17:35:26
Been looking for something to plug holes in my barn door (they give you stickers). Fit perfectly
RN
2025-03-03 14:00:21
Do not try to force it into a smaller hole, it pops out.
BB
2025-02-11 18:49:01
Did the job!
Lee
2024-12-05 15:14:39
The plugs fit well but look cheap
Recommended Products