Your cart is empty.
Your cart is empty. Features:
1. This brilliantly designed Pipe Heat Tape provides an upper heating limit of 140℉ (60°C) which never overheats
2. Featuring an aluminum foil lining and waterproof Oxford cloth exterior, this pipe heating blanket resists high temperatures
3. Water pipe heat blanket with extended design, only one plug is needed to heat up. Suitable for longer water pipes Specifications:
Color: orange
Size: 39.98 inch x 5.9 inch
Cable length: 59inch
Package includes:
2 x Water Pipe Heat Blanket
Note: The second item in the twin pack is not equipped with a plug and cannot be used separately. Please note this before usage to avoid potential problems.
GShultz
August 21, 2025
Used this heat wrap to protect a 3/4" PEX pipe where it enters the house and is exposed about 24" length.It just got put to the test with a stretch of temps in the low 20s (F) for 8 hours and 36 hours below freezing and it worked perfectly.In the past, I had to go with a heat gun and thaw the cutoff valve to get the water flowing after a cold night, but no issues this time around.From what I understand, the heat wrap is not thermostatically controlled to come on when the ambient temp hits freezing or below, rather will cut off when the wrap reaches 140 degrees Fahrenheit.That's fine for my use because where I live in Texas, we typically only have cold snaps a couple of times per year that get down into the teens or 20s for a night or two, so I don't mind going around and plugging this heat wrap in along with others I have on the water well.I might get a couple of thermostat plugs that automatically turn on below 32℉ and turn off above 47℉, because they are available for under ten bucks each on Amazon. I note this for anyone else that might want/need this heat wrap to come on and shut off automatically.I don't know about the issues some other reviews stated about installing the wrap because I was easily able to wrap it around my pipe and secure it additionally with the provided zip ties and it stayed in place without any problem. The whole process only took about 5 minutes.I am satisfied with this heat wrap so far, but I can't speak yet to how many uses I will get from it, but I will come back and update my review if it doesn't last at least a couple of seasons.Was shipped/received fast.
Deborah S
July 30, 2025
Here is my take on how this product works. It seems to be a constant ON heat blanket. One of the product photos shows the following: As the (air) ambient temp increases, the inside of the blanket increases. The photo shows the top temp is 140 degrees. When plugged in inside my 74 degree home, it heated up. IF the product contained a thermostat for freeze protection, as the air temp goes up significantly above freezing, the heat should decrease. I don't think it has a thermostat. Recommendation: If you live in a rare freeze location, apply this for freezing temps and recheck daily to determine if it needs to be removed. I would not leave it in place year round, because it does not automatically turn off. I live on the south coast where we rarely have temps in the 20s. I plan to use mine on external water pipes and below small fruit trees that are blanketed above. It will not be in direct contact with the tree trunk. I will place it in direct contact with water pipes. The instruction leaflet refers to a thermostat. Perhaps the leaflet author did not understand how the product works or does not understand what the word thermostat means. If used under the above stated conditions, I think it should work well for my needs. If it does not, I will update this review. I just purchased a second one. I spent an hour researching prior to purchasing this product. I leave this review hoping it will help someone else spend less time.
Dan Quigley
May 5, 2025
I really wanted this to work for my situation. The concept is solid - stickable, waterproof heating blankets that wrap around pipes for freeze protection? Sounds like a great engineered alternative to traditional heat tape. And to be fair, for the right application, this could be a great turn-key solution.Where It ShinesWell-constructed: No complaints about quality here. The materials are solid - aluminum foil lining for heat conduction, waterproof exterior, and securely stitched heating wires for even distribution.Easy install (in theory): If you’ve got a straight run of pipe or even a simple 90-degree bend, the included hook and loop straps and zip ties make installation pretty straightforward.The Real-World ChallengesNow, here’s where things got tricky. My pipes have a tight 90-degree bend and run up against a Texas limestone garden wall. That meant:The heating blanket didn’t conform well to the bend, so I had to wrestle with it.The straps were great in theory but didn’t hold as securely in my situation (not long enough.) I had to add extra zip ties to keep the blanket from slipping.Traditional heat tape would have been much easier to install here.The “Two-Pack†QuirkThis product comes (optionally) as a two-pack, but one of the blankets doesn’t have a standard AC plug - it’s designed to be installed in tandem with the first unit. The problem? If you only install one, you’re left with an exposed connector, even though it’s recessed. That’s not great for a 110V AC connection in freezing, wet conditions. So, if you only need one, buy a single-unit product instead.One More Note: Metal vs. Plastic PipesWhile the product says it works on both, I’d recommend double-checking the manufacturer’s guidelines before using it on PVC or PEX pipes. Different materials have different heat tolerances, and you don’t want to compromise safety or effectiveness.Final VerdictIf you have a simple setup with exposed, relatively straight metal pipes, this could be a great hands-off solution. It’s well-made, effective, and easy to install in ideal conditions. But for more complex installations - tight bends, constrained spaces, or if you only need one heating blanket - traditional heat tape might be the better option.â 3.5 stars, rounding down to 3 - not because of quality, but because it’s not as universally flexible as I’d hoped and expected.
V Quance
April 18, 2025
This stickable waterproof pipe heat tape blanket is a solid solution for preventing frozen pipes in colder months. The adhesive backing makes installation simple, and it stays securely in place on both metal and plastic pipes. The heating performance is consistent, providing noticeable warmth to keep pipes from freezing. The included 6ft power cord offers decent flexibility for setup. The aluminum foil layer helps distribute heat efficiently. Overall, this is a well-designed product that delivers dependable freeze protection.
VJH
February 10, 2025
No instructions. Wasn’t sure if there was a thermostat inside the unit. I just went out & plugged it in, seamed to actually work as I’ve had no freezing pipes with this brutality cold winter.
Recommended Products
