Your cart is empty.
Your cart is empty. Feature:
Used for machining nuts or other common thread on the machine
Used for clocks and watches, and low hardness of wood and soft metal hole processing
Specifications:
Material: high speed steel Size: M1, M1.2, M1.4, M1.6, M1.7, M1.8, M2, M2.5, M3, M3.5
Quantity: 10 pcs
Weight: 35g
Package Included:
10 x Machine Hand Tap(Coarse thread)
Chris1683
August 22, 2025
I couldn’t be happier with these! Not only are they superior quality but they are also spot on for the sizes. I mainly used the M3 tap to thread holes for an aluminum RC crankcases. The tap worked beautifully and the new threads looked like they were made at the factory. I have to give these 10/10 for being top quality and fair priced.These bits fit perfectly in a Vermont American 21916 T-Handle (Also available on Amazon)For my use, I was tapping threads in aluminum. I first drilled a smaller hole using a drill press. I then tapped the new threads in using a dab of oil. I HIGHLY recommend taking your time when making new threads. Once it starts to grab, go about 3/4 of a turn, then back about 1/8 of a turn. Then repeat the process. I repeatedly took the tap out to clean excess pieces of the filings it creates as I was making progress. Again, just take your time and don’t muscle them too much and you will have perfect results!
Mary G.
August 16, 2025
Purchased for project building. Taps worked great, good value.
Michael C.
August 13, 2025
Bought these taps for my R/C hobby to work on vehicles. Along with the Pin Vise bought the work very well together for re/tapping threaded holes.
James L.Davis
August 12, 2025
Not the best quality but,they work alright
Rick S.
June 16, 2025
I’ve tapped several holes in aluminum with the 2.5 and 3 mm taps. Still sharp and no breakage. Definitely use lube and make half in half out turns to clear any chips. Nice little box to keep them separated from each other and in one place.
DP
May 7, 2025
Taps not labeled, thus far I can not use any of them. Tried to thread holes but so far none seem to tap any of the holes. Bought taps to thread holes in the frame of a RC Vehicle. Have another set which seem to be better but start with the larger tap size. I have a cheap set that seems just as good as these. Disappointed none have worked thus far.
DJ
March 17, 2025
I use these to tap holes in 3D printed projects. You can use heat inserts instead sure but sometimes all you really need is a tapped hole to keep something in place. These work great on anything plastic. Have yet to use on anything metal.
jeffsram04
February 9, 2025
A great little set of metric tapsvery sharp and cut accurate threads. I am using them to produce threads in various 3D printed materials including PLA, ABS, PETG, Nylon, Carbon Fiber PLA and Polycarbonate. A great selection of sizes. I would highly recommend this product to anyone who needs to create threads in these materials. Shipping was fast.
Uno Qui
January 14, 2025
Meets my needs.
KP63
November 28, 2024
They do the job. Looks used. The box is cheap very easy to break plastic, and so hard to open that you end-up making a "tap rain" all over the floor.
Recommended Products
$52.95
$ 24 .99 $24.99