Your cart is empty.
Your cart is empty.Product Description
Rust-resistant T Nuts made from high-quality zinc-coated steel
Dependable and durable T Nuts for all your projects.
The strongest choice for indoor and outdoor use.
Heartman
June 25, 2025
I was concerned about them working with 1/4 x 20 threads. They are working great. No complaints
Mark Johnson
June 11, 2025
Our big box store is always out of these and when they do have them they are like $2.50 a PAIR! Outrageous!These were a great value by the 100 bulk pack and they arrived in 2 days. I will be buying more of them on Amazon. Well made and they work great. A+++
Customer
May 31, 2025
I bought some of these in the 1/4 x 20 size to make a custom spoil board for my Shopbot desktop router. I really wanted some without the barbs on the back, but I figured at $10, I'd take a chance. They worked out exactly as I hoped they would. Since these were on the back of the spoil board to provide hold down locations from the top, I took a pair of pliers and easily broke the barbs off as the MDF I use would have never survived those barbs. I then drilled a 3/8 hole in a piece of mild steel and used it as an anvil to flatten the rim of the Tee Nut out.For those who are interested, I used a .800" x .075 counter bore on the back with a central hole through the spill board of .310" diameter. This required tapping them in with a mallet and I used a flat punch to make sure they were seated into the counterbore so they would not contact the machine bed.It's a little more work than buying the brad hole version, but they are insanely cheap. When this spoil board is used up, I intend to just use a 1/4 x 20 bolt to drive them out from the front and reuse them. A great product at a great price. BTW, none had tight or distorted threads, all were free running!My only complaint is I wish they made these with just a round rim for the same price so you didn't have to remove the barbs.
Aaron Hess
May 19, 2025
They are good quality, but we normally install these with some adhesive to hold them in better. The coating finish doesn't stick well to epoxy or other glues so they didn't hold as well as unfinished ones did.
Nate
May 13, 2025
Great threaded nuts for adding 1/4-20 metal threaded nuts to wood projects.
Tim Flynn
May 11, 2025
Put a seat cushion on a bench. Worked great.
YES TRUMP!!!
April 29, 2025
As advertised.
Ruth S.
April 19, 2025
They work fine to hold the plywood sides into my trailer.
Mark Radvanyi
February 20, 2025
Nice product.
Customer
February 16, 2025
Used half a package attaching plywood to utility trailer sides, no defective nuts in the lot.
DPM
January 3, 2025
Used these tees nut in my shop and garage for multiple project
Ghenadie Sirghi
January 1, 2025
Good
Tim
December 14, 2024
Work as advertised
Recommended Products