Your cart is empty.
Your cart is empty.Customer
August 25, 2025
It's steel, has a large internal diameter and is sealed my metal gaskets coated in viton.
Annally
August 5, 2025
Installed on my oil pan for a project which suited my needs. I’d recommend .
Travis L Waddell
July 4, 2025
I drilled this into a stock 302 roller with Edelbrock heads, e303 cam and Edelbrock performer heads. Made the turbo install all the more easy. Love this and will buy again.
Cody Z
June 24, 2025
I used this on a jeep 4.0l turbo project but can be used as a turbo drain on a steel pan easily
C Ro
June 20, 2025
Used to tap my oil pan for a lower turbo drain because my larger turbo sat too low for the block mounted drain location. This allowed me to fix my drain problem that was causing oil backup in my turbo housings.
Rgraczyk
March 3, 2025
These bulkheads are a great addition to my Turbo LS build. Fit snug and look great!!! Pick them up if you need turbo drains in your oil pan!
Alloutofdonuts
February 22, 2025
Used for a drain hose on a little off road project buggy i turbo’d. I thought it was stainless steel but it’s not(it says it’s steel I just assumed wrong based on the finish). Does what it’s supposed to, doesn’t leak at the washers or fitting. Well made piece and the price can’t be beat.
David burnworth
January 11, 2025
product overall was very good worked as intended, was shipped quickly and installed easily the only thing i would recommend is the use of some lok-tite, or your choice of thread sealant as mine has started to back off under normal engine operation. have it installed in oil pan
Kevin
January 3, 2025
Just hold the bung with a wrench when tightening the line
Dave Funk
December 30, 2024
Used on oil pan
Recommended Products
