Your cart is empty.
Your cart is empty.Product Description
Specification:
Power Supply: 3x 1.5V batteries
Sensitivity & Time:
50ppm, alarms within 60~90 minutes
100ppm, alarms within 10~40 minutes
300ppm, alarms within 3 minutes
Standby Current: <50uA(without LCD); <200uA(with LCD)
Alarm Current: <75mA
Operation Ambient Condition: 5~40°C，20~90%R.H.
Green LED: The green LED flashes every 30 seconds to indicate the unit is operating properly.
Red LED: When a dangerous level of carbon monoxide is detected the red LED will flashes and the alarm pattern will sound.
Joe D
2025-08-24 17:57:46
Small, which is perfect for mounting. Alarm is loud enough. Easy to mount on ceiling with clear instructions
T-Momma
2025-07-12 13:28:48
I haven't seen them. A cousin put them up for my mom and said they are fine.
Kateryna
2025-06-25 17:40:44
Cheap made but work. Tossed into two rooms as a backup
Jay
2025-04-12 17:51:29
Tested them both and work great !
Chris
2025-04-07 13:22:42
Gave a reading when testing near a propane heater of 40. The next day in the same spot under same circumstances the reading stuck on 000 for over 30 minutes. Even moving the unit closer the reading stuck at 000. Very cheaply made. Returning. Get a more recognized brand if you’re concerned about safety.
Malik Dennis
2025-03-18 16:49:05
The media could not be loaded.
Rebecca Wyatt
2025-02-16 15:05:20
Great
Saltman
2025-01-08 09:33:09
The batteries that came with both units died at the same time, about two months after I installed them. I have no way to check if it detects CO or not. However it does not have any standard institute markings on it, so the local building inspector rejected them.
Recommended Products