Your cart is empty.
Your cart is empty.Product Description
Anndason 2 PCS 6'' Black Deck Plate Kit Deck Hatch with Storage Bag for Fishing Kayak Boating
Our hatch covers help reduce UV damage to the hatch. They are made of high-quality PVC + ABS materials and have a long service life. The red waterproof bag which can be removed from the hatch is easy to install and dismantle, safe and practical. EVA gasket protects the hull from damage.
Free screw
No need to purchase additional accessories
Easy to install
You can complete the installation by yourself
Easy to open and close
Humanized switch design
PilotJim
2025-08-19 12:55:56
I was shocked because of the price. I expected semi great hatches, but instead I received two good quality hatches. Well made for the price. They Even came with SS hardware to install. I used the foam sealing gasket for the template to cut my holes and installation was a snap. These hatches are for flat areas, installing on a curved surface will hence the door operation. The hatch seems to be airtight so far, but I would not call the interior bag waterproof. It’s a good quality bag, but stitching says it’s not waterproof. Expected, just put your stuff in a zip lock bag if it can’t get wet. The bags keep my gear inside within reach, the interior bags can be removed for cleaning. Great buy!
Charles D. Rockwell
2025-07-21 14:29:28
I got these to add a forward hatch on my Lifetime kayak. Mine didn't come with the hatch, but it was evident one could be placed there & after the cutout, it fit perfectly! Right from the package, I immediately noticed these were of good build quality & i was provided everything needed for the install,minus the silicone i chose to add. During installation, get a can of scotch guard or any type of water repellent & treat the outside of the bag. If the depth of the bag is an issue & is laying on bottom of your kayak, roll it up a few rolls & zip tie it in place. Last is to always carry zip lock bag's as a secondary protection for keys,phones,cameras or whatever can't get wet. Overall,I'll definitely recommend these hatches & I'm very pleased with the purchase!
Mike Waldrop
2025-06-25 12:58:34
It worked good on my kayak . Wasn't hard to install
Jennifer
2025-05-25 14:33:48
Installed in a kayak that had no storage. Plastic feels very solid. Gasket fit well and was a good template to use to trace the circle to cut out with a jigsaw. Make sure you save the cutouts, so in the future if you get a hole in your kayak, you can melt it and use it to repair and patch it.Hatch cover is easy to operate, much easier to use than the screw on hatch lids my other kayak has. Not sure if bag is 100% waterproof, probably not, I suspect it has good water resistance though. Feels like it’s good for splash protection but not submersion. Would suggest to be safe you use ziplocks for things that can’t get wet.Good product to add extra needed storage space.
Barney Rubble
2025-05-18 11:00:18
Read a few reviews on dry storage and went with this option. Had boat in water last week and no issues with leaking.The storage comes as a full unit, but is made up of 3 pieces: the lid section, the storage bag section and the gasket. The gasket is pre cut with screw holes, but you’ll likely have to pop out the nubs from the holes.Install is fairly straightforward, but is made easier with a hole saw. Note the storage is listed as being 6â€, but the flange mating under the lidIs actually 6.5â€, so you’ll need a 6.5†hole saw if you choose that route.Once hole is cut sand the cut area smooth. Pop the main body and gasket into the hole and align gasket holes with top section holes for screws. You can drill pilot holes if you like, but the screws will go in just fine without them. I suggest a small bead of marine sealant around the screw points for added protection. Drive screws in a star pattern to ensure ring is seated flush on the boat.Install dry bag, close and secure lid and you’re good to go.If you choose to use a hole saw be sure to use one with locking pins on the arbor. Your wrists will thank you.
Trikie_Dik
2025-05-09 18:58:08
I got these to install on my fishing kayak about 3 years ago, and they are still going strong! Install was a bit scary at first since your cutting into your nice new kayak, but take your time and plan your cuts and it will go fine. I undercut the hole and sanded to make it perfect, but also reccomend adding some sealant to the screw holes. Overall im very happy with the purchase especially given the price.
sara ciechowski
2025-04-20 15:37:25
It holds a bit of stuff but it lets water in. I stick my phone in it while kayak fishing and it got so soaked with water that my phone wouldn’t turn on for almost 2 days. Now I keep it in a ziploc in these cubby holders but it would be nice not to have to put everything in a ziploc before I put them in these
Warby
2025-04-15 14:36:54
I don't know if there's a ton of brands of these. But these worked very well. Had to purchase a hole saw that size. Once you trust your guts on a brand new expensive kayak and drill your hole it's well worth it. Get over the 😨 drill the ðŸ•³ï¸ nothing better than dry car keys phone and anything else important
Mandy Petrie
2025-04-11 14:35:31
They fit great and work well. Pay attention to how many screws holes your old ones have on them though. I chose to re drill mine as I wanted these ones instead of the push on ones I had before and needed an extra hole
Trevor
2025-03-07 11:22:51
Worked perfectly
margaret moreira
2025-03-02 15:26:28
These worked great with only one draw back, I wish the foam had been pre-drilled, when tightening the screw it pulled it under leaving a small gap where water could potentially get in. Otherwise super easy to install.
Mark -Newmarket, On.
2025-02-22 11:59:53
I bought this hatch 2 pack to install into 2 Malibu Two XL kayaks that I picked up used. Screws and a gasket were included but I added some silicone sealant during installation to make sure there are no water leaks. They were easy to install & seem to be good quality.
Gilles Dubé
2025-01-29 11:02:23
Utilisé comme coffret de rangement sous les sièges de mon bateau ,excellent produit ,les vis incluses ne sont pas adaptées pour ce produit ,il serait préférable des vis qui s'encastre a l'intérieur au lieu que la tête des vis dépassent.Mais la qualité du produit est irréprochable.
Recommended Products