Your cart is empty.
Your cart is empty.Product Description
Features
As the manual electric drill is rotating too fast, please pay attention to speed regulation. The larger the drill diameter is, the slower the rotating speed is required.
If the drilled material is too hard, first use a 3-6mm drill bit to make small holes, and then use a large drill bit to ream the holes.
The rotation speed of the electric drill for drilling hard objects should be between 80-120, and the effect is best.
Because stainless steel contains cracked alloy components, its hardness and mechanical properties are higher. When drilling with a hand drill, you need to apply enough pressure and enough motor power. It is easier to use a bench drill.
When drilling, conditionally add coolant or cutting fluid to cool down to reduce the damage of high temperature to the drill bit and extend the service life of the drill bit.
WN
2025-09-03 19:32:44
Drilled a few holes in milld steel and they performed flawlessly.
David
2025-08-20 17:40:55
Worked great and was very sharp.
mike barber
2025-08-19 11:10:22
I have only cut aluminum with this on my lathe, so for that end I can say it works great.
Walt H
2025-08-16 16:58:43
Keep it sharp and should last a long time. Is not soft, it must hard to drill steel!
CG1982
2025-08-11 16:06:15
The drill bit was fair in price and was exactly what I needed to do the job. And was shipped out really quickly.
csmith
2025-07-29 15:06:39
Hard to find metric drill bits locally so had to source online
Evan
2025-07-11 18:28:50
The flutes have giant burrs left from the grind along with random chips missing from it. The cutting edges has chips also. The chisle point is not even straight along with the lip clearance angle. Even the bottom of the shank is cut at angle instead of flat. One of the worst drill bit I ever seen.
Tyler
2025-06-27 09:53:41
Good quality, got the job done without having any issues.
lloyd7567
2025-06-11 14:29:09
I needed to drill 6 holes into a 4 inch wide by 40 inch long 1/4 inch piece of flat steel to use with concrete anchors to stabilize a vertically cracked 4 foot high concrete wall. With oil used to assist with the drilling this bit performed very well and the drilling was done in the matter of only a few minutes. The bit is still in good condition and there is no need to even thinking about sharpening it yet.
Patrick Doré
2025-06-09 13:14:08
Comme décrit
WN
2025-05-01 12:53:05
Drilled a few holes in milld steel and they performed flawlessly.
David
2025-04-26 18:46:52
Worked great and was very sharp.
mike barber
2025-04-05 11:11:48
I have only cut aluminum with this on my lathe, so for that end I can say it works great.
Walt H
2025-03-17 12:41:00
Keep it sharp and should last a long time. Is not soft, it must hard to drill steel!
CG1982
2025-03-12 10:19:34
The drill bit was fair in price and was exactly what I needed to do the job. And was shipped out really quickly.
csmith
2025-03-10 18:12:47
Hard to find metric drill bits locally so had to source online
Evan
2025-02-21 18:14:48
The flutes have giant burrs left from the grind along with random chips missing from it. The cutting edges has chips also. The chisle point is not even straight along with the lip clearance angle. Even the bottom of the shank is cut at angle instead of flat. One of the worst drill bit I ever seen.
Tyler
2025-02-07 11:03:56
Good quality, got the job done without having any issues.
lloyd7567
2025-01-26 11:51:24
I needed to drill 6 holes into a 4 inch wide by 40 inch long 1/4 inch piece of flat steel to use with concrete anchors to stabilize a vertically cracked 4 foot high concrete wall. With oil used to assist with the drilling this bit performed very well and the drilling was done in the matter of only a few minutes. The bit is still in good condition and there is no need to even thinking about sharpening it yet.
Patrick Doré
2024-12-26 17:37:27
Comme décrit
Cliente
2024-12-11 16:26:14
Medida exacta, bien embalada y perfecta para usarse.
Cliente
2024-12-02 18:02:10
Medida exacta, bien embalada y perfecta para usarse.
Recommended Products
$159.95
$ 77 .99 $77.99