Your cart is empty.
Your cart is empty.Product Description
Warm Tips
Butt joint exhaust clamp can be easily installed or replaced, won't damage the pipe.
Please double check the size of pipe before purchasing. You could check the pipe size range to decide which clamp to choose.
2.25" Butt Joint Narrow Band Exhaust Clamp
360 Degree Innercircle Watertight Seal
BATONECO butt joint muffler clamp provides a tight evenly 360 degree seal for the plumbing system,could prevent leakage and deformation.
This clamp can be widely used in exhaust pipe,muffler inlet/outlet,manifolds.
- Clamp Size: 2.25 inch
- Pipe Size Range: 2.25"-2.5"
- Band Width: 1.22"
- Band Thickness: 0.07"
- Material: 304 Stainless Steel
- Include: 2 X 2.25 Inch Exhaust Clamps
- Features: No Welding Design,Leak Free Connection
C boss
June 13, 2025
The Bill quality is amazing and the hole was amazing as well
GrvCat
May 13, 2025
One of the clamps worked very well. The other one broke at the bend and to be fair I broke it putting an unusual ammount of torque on it, a lot more than anyone would probably ever need in any given 'normal use' situation. I must admit they are quite strong.
Customer
May 11, 2025
These Exhaust clamps are good quality, The bands are stainless steel and the bolt and nut is coated steel. I have installed these and they work good. I recommend them.
Customer
March 18, 2025
Very capable substitute for factory clamps, and quicker cheaper and just as substantial.
Daniel N sr.
March 7, 2025
Came quickly I'm impressed !
TobyK
December 29, 2024
PLUS: This is a true, narrow width 2-1/2†butt joint clamp, which are harder to find on Amazon (not sure why Amazon placed my review under the 2-1/4" size). Most are designed for clamping over the OD of a larger slip joint (oversized). Those others are somewhat similar to a conventional exhaust U-Bolt (which this is NOT).PLUS: The band is very thick, I measured it at .08†(2.0mm) which is about 14 gauge. This is VERY good if you need to weld a support rod to it, which is what I intend to do. Much more preferable than welding to a thinner stainless exhaust pipe.NEUTRAL: The band thickness means you really need to crank down on the bolt to get the band to form correctly around the aluminum extrusion if you use it as a true butt joint clamp. If so, I suggest you first coat the bolt threads with anti-seize compound to prevent thread galling and help in future disassembly. I used a nickel-based, high heat type for this but I suspect that was overkill. I think standard anti-seize compound should be fine. I’d also strongly suggest a liberal coating of Permatex 80335 muffler and tailpipe sealer to fill any gaps around the band at the butt joint and around the aluminum extrusion if you’re using it as a true pipe to pipe butt joint as opposed to just an add-on (thicker) welding surface.MINUS: I doubt very much that this is 304 stainless as it is highly magnetic, much more likely a grade 4 stainless. Time will tell as I’ll compare the discoloration and corrosion of the 304 stainless pipe (not very magnetic at all) to this clamp band.MINUS: The aluminum extrusion on both of the units I got were somewhat malformed (see pic). Both had a bit of a curve, not at all straight. That’s also a reason I suggest the use of Permatex 80335 to fill in any gaps.SUMMARY: Pretty good, but not 5 stars, I rounded up my rating of 3.5 to 4 stars. Very usable, solid, so far seems fit my needs. Fix the aluminum extrusion to get to 4. IF IT’S TRULY 304 STAINLESS, it gets a 5 (but honestly, I do not think it’s 304). With that said, I did order two more in the 2-1/4†size to do the smaller post muffler tail pipes on a C1 Corvette.
greg sefcik
November 22, 2024
Worked out perfect for my custom Mercedes exhaust
Byron Aberle
November 18, 2024
Installed on 2.25 pipe just fine. Great clamp especially for the price.
Recommended Products
$11.99
$ 5 .99 $5.99
$15.99
$ 7 .99 $7.99