Your cart is empty.
Your cart is empty.Product Description
High precision belt
- Belt width 10 MM thick 2 MM, no slippage and no breakage.
- The small wheel drives the big wheel to increase the torque.
795 High Power DC Brush Motor
- Pure copper coil
- Front and rear double ball bearings.
- Voltage: DC 12-24 V universal
- Speed: 1000 rpm at 12 V and 2000 rpm at 24 V
Lifting locking screw and Stroke fixing screws
- 1. Lifting locking screw
- Loosen these two screws and adjust the machine to the appropriate position and then locking them.
- 2. Stroke fixing screws
- You can control the drilling depth by adjusting these two screws.
Quality materials
- Precision straight line slider
- Tightly matched with the spindle without any clearance.
- 12 mm hardened spindle
- Eliminate the up and down movement deviation.
- 304 stainless steel spring
- No rust, high toughness.
Chuck clamping range: 0.6-6 mm/ 0.0236-0.2362 inch
The machine is more suitable for drilling wood, plastic, acrylic, hardwood, soft metals (such as aluminum, copper, etc.), it is recommended to drill metal holes with a depth of no more than 1 cm/0.39 inch.
When drilling metal, please add water or oil to cool and lubricate the drill bit, and multiple drilling operations may be required.
If the motor is hot during use, please let the table drill press machine rest for a while before working again.
Recommended Products