Your cart is empty.
Your cart is empty.Jim & Roni
September 7, 2025
This third brake light for my 2010 F150 Supercrew arrived fast and was packaged well inside a bubble wrap sleeve and a decent cardboard box. I received the smoked third brake light and a package of two washers. There were no instructions to be found however, installation was easy in my opinion.The following is how I installed mine.Removed two Phillips screws with nuts on the backside of the new unit, likely for shipping reasons. These were not reused. Removed two Phillips screws from the old third brake light unit and carefully removed the old unit. I cleaned the mounting surface. I untwisted the three bulb holders from the old unit. The middle holder was for my brake light. The other two were for the cargo lights. I removed the three bulbs from their holders. I connected the new unit - black and white wires to one of the cargo lamp bulb holders and the center red wire to the brake light bulb holder (center holder on the harness with a red wire running to it). Connections are made by pushing the new wire plug assembly into the old bulb holder. One bulb holder will not have a connection. This was for the second bulb for the cargo lamps on the old unit. I then inserted the bulb holders into the new unit and twisted them into place. I installed the rubber-type washers on the original mounting screws with the cup face against the screw head. I installed the screws by hand making sure the unit was snug taking care not to over-tighten and damage the new unit. Performed an operational check. Looking forward to seeing this at night. Hoping for a long, leak-free life from this.
SkippyTC
August 6, 2025
Installation was a little tricky as the light seemed to fit rather 'snugly'. Working great and adds a smooth clean look to the truck (2018 RAM 1500). Beats the stock look and functionality completely. Sets the truck apart from all the others.
genoknows
August 2, 2025
easy install, Plug wire harness into factory plug Clip 2 alignment pegs from back of light assembly with nail clippers, place 2 provided gel washers 1 on each oem screw saved from original light assembly. Do not over tighten. Both red brake and white cargo lights are very bright installed on 2016 Ram 1500
Michael Scott
July 26, 2025
I would've given 5 stars....but fit wasn't perfect. The cargo lights are bright, along with the 3rd brake light function.
Ford power
July 22, 2025
Couldn't use it was way larger then factory would have to cut out the body to make it fit and lot of custom work to seal it up right
Customer
May 30, 2025
Looks great. Easy install. No leaks.
Steven S Spicer
March 23, 2025
Plug and play. works and looks great.
dahnryman
March 12, 2025
With constant adjusting (which is expected at first due to foam seal) the plastic lenses cracked around the screw points. Yes could be user error but I was very careful to use only a screw driver. Looks great but maybe the seal is just to thick for this application.
Antonio Aguilar R.
February 28, 2025
Me gusta mucho el diseño y la luz blanca que es súper intensa. Y lo que me desagrada es que no funciona la luz roja. No sé qué hacer si devolver el artÃculo y esperar a ver qué solución me da el vendedor
Anastasios
February 8, 2025
nice little upgrade for the truck. nice and sleek
Philip
February 8, 2025
didn't install yet but looks good
Customer
December 22, 2024
Opened box and was used light. Printed return label but cannot see on my account as retuning anymore. Caution when purchasing.aube jistma one time purchase and was accident
Customer
December 18, 2024
The media could not be loaded.
Recommended Products