Your cart is empty.
Your cart is empty.Product Description
Use the wood screw
The chuck set comes with a 3/8" and a 1/2" screw chuck.the screw chuck is helpful when turning larger workpieces.
1.Turn OFF and unplug your lathe.
2.Mount the screw chuck in the chuck with an internal grip. The bottom lip of the screw chuck
should be under the jaws to help hold it in place.
3.The base of the workpiece should be flat and square to its sides. Using an 8.3mm (21/64") drill
bit or a 11.5mm (29/64") drill bit, drill a pilot hole straight down into the center of the workpiece,
approximately 31mm (1-7/32") deep.
4.Screw the workpiece onto the screw chuck. The base of the workpiece should be flush against
the top of the jaws.
Round jaws
A versatile round jaw complete with Woodworm Screw. Woodworm screw comes standard for fast mounting of rough timbers. It is able to handle both bowl and spigot projects.
Big round jaws
It is designed for expansion dovetail, reverse dovetail and grab foot bowl, with large clamping size.
Pin jaws
The pin jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetailwhich grips work away from chuck face, allowing access to some outside bowl turning.
Step jaws
These are powerful step jaws for smaller delicate work. The longer jaws allow for strong spigot and precise grip needed for unsupported small, longer work, as well as smaller spigots incontraction, such a pen blanks.
Flat jaw
These versatile flat jaws are designed for remounting bowls to remove chuck marks, add decoration or to reshape the bottoms of bowls that have already been turned.
Jarred
September 1, 2025
Works like it should, looks nice and case is pretty good.
Timothy Newman
August 27, 2025
Well balanced with multiple option for a great price.
Mistral_Prodigy
August 25, 2025
Works well on my midi Jet 10/15. It isn't a Vicmark, or even a Nova, but it does the job well for someone who is a casual hobbyist turner. There is some minor runout, but not enough to make a difference at this craftsman level. It's well made from heavy stock steel and nicely finished with a decent set of jaw options. The only finish issue is that the saw blade used to quarter the jaws during manufacturing is very rough or worn. This means that every face is scored and every edge has sharp burrs. Spend a few minutes with a hone to take off these burrs - especially at the jaw edges. Otherwise you will nick yourself and mar the workpiece. One other minor problem is that the jaw adjustment holes are a loose fit, and rattle around.Surprisingly, the Cole jaws worked very well and firmly gripped the 6" trial scrapwood glue-up bowl that I made as a test piece. I didn't anticipate that these would be up to much, but they are great for internal and external clamping so that you can finish that foot. The pin jaws are also great for holding on to the inside of small boxes.On the whole, I am very happy and have no reservation recommending this Deefine chuck system to beginner turners as a first chuck.
Gene Blackwell
August 18, 2025
I like the finish on this product. I also like things organized so a case was very important.
Mark W. Forsell
August 8, 2025
They are all nickel plated so they won’t rust, even a not dry environment like ny garage.
Spook
July 22, 2025
The items work well on my lathe . I have been able to turn a couple items right now.
Hermann Hermannsson
July 14, 2025
Fullfills expectation
Johnny the Shoe
July 13, 2025
My Deefine wood chuck is an essential component of my wood turning. It clamps the projects and holds them like a vice while I turn to my hearts content. I’d be completely lost with out it!
Stephen white
July 11, 2025
Works good all the jaws work nice it seems a little loose but holds good.
Erwin
July 7, 2025
Liked everything about this chuck. Holds the wood beautifully.
Customer
July 2, 2025
has been working good on my wood lathe
Darren P.
June 16, 2025
I had to send the first one back as it didn’t appear to be mailed properly. I got a replacement and it’s decent for the price. It’s no Vicmarc or Oneway but it’s also a quarter of the price. It’s a good starter chalk, but that’s about it. It does come with a lot of attachments so it’s a decent job if you need some extra attachments or a secondary check for some small work.
Jarred
May 20, 2025
Works like it should, looks nice and case is pretty good.
Timothy Newman
May 3, 2025
Well balanced with multiple option for a great price.
Mistral_Prodigy
April 20, 2025
Works well on my midi Jet 10/15. It isn't a Vicmark, or even a Nova, but it does the job well for someone who is a casual hobbyist turner. There is some minor runout, but not enough to make a difference at this craftsman level. It's well made from heavy stock steel and nicely finished with a decent set of jaw options. The only finish issue is that the saw blade used to quarter the jaws during manufacturing is very rough or worn. This means that every face is scored and every edge has sharp burrs. Spend a few minutes with a hone to take off these burrs - especially at the jaw edges. Otherwise you will nick yourself and mar the workpiece. One other minor problem is that the jaw adjustment holes are a loose fit, and rattle around.Surprisingly, the Cole jaws worked very well and firmly gripped the 6" trial scrapwood glue-up bowl that I made as a test piece. I didn't anticipate that these would be up to much, but they are great for internal and external clamping so that you can finish that foot. The pin jaws are also great for holding on to the inside of small boxes.On the whole, I am very happy and have no reservation recommending this Deefine chuck system to beginner turners as a first chuck.
Gene Blackwell
April 17, 2025
I like the finish on this product. I also like things organized so a case was very important.
Mark W. Forsell
April 11, 2025
They are all nickel plated so they won’t rust, even a not dry environment like ny garage.
Spook
March 23, 2025
The items work well on my lathe . I have been able to turn a couple items right now.
Hermann Hermannsson
March 9, 2025
Fullfills expectation
Johnny the Shoe
February 7, 2025
My Deefine wood chuck is an essential component of my wood turning. It clamps the projects and holds them like a vice while I turn to my hearts content. I’d be completely lost with out it!
Stephen white
February 2, 2025
Works good all the jaws work nice it seems a little loose but holds good.
Erwin
January 26, 2025
Liked everything about this chuck. Holds the wood beautifully.
Customer
January 10, 2025
has been working good on my wood lathe
Darren P.
January 5, 2025
I had to send the first one back as it didn’t appear to be mailed properly. I got a replacement and it’s decent for the price. It’s no Vicmarc or Oneway but it’s also a quarter of the price. It’s a good starter chalk, but that’s about it. It does come with a lot of attachments so it’s a decent job if you need some extra attachments or a secondary check for some small work.
Recommended Products