Your cart is empty.
Your cart is empty.Size: 9" x 4.5" x 2.5", Withstands Up to 2300°F/1260°C, Quantities: 6 Pieces, Material Composition: Alumina & Silica
matt kloster
2025-08-31 15:00:48
all 4 packages came and were unbroken in perfect. There had been some problems with people getting broken bricks but not mine everythings great
imeltstuff
2025-08-18 15:29:09
I was using 1 inch fire bricks before and was having to bend over really good to do the melting pouring into the molds. Got these bricks and stacked them up and totally changed my efforts. Thanks
Iris B.
2025-07-09 11:39:56
Used for a slump in fusible glass in my kiln. Remember to kiln wash at least 5 coats. Fiber paper is a good idea as well.
Lou Trcka
2025-06-26 17:41:34
Very poorly manufactured - angles are not square - butt them up together and you will have visible gaps. Also two bricks sideways butted up against a brick long way does not equal a square; you end up with 3-4mm overhang on one side so if you plan on not using mortar between them there is no way to create a tight heat seal…..
Larry E. McCoy
2025-06-23 19:58:26
These are working very good for brase welding. I have them fastened to my welding table.
bananahamster
2025-06-09 12:10:02
Nice bricks, good packaging, arrived in perfect condition.
Jorge Gonzalez
2025-02-07 12:41:30
Use in jewelry kilns
doug chandler
2025-01-13 17:05:58
The media could not be loaded.
Recommended Products
