Your cart is empty.
Your cart is empty. Reinforced rotary tool cut off wheel
1. Using a simple, complete accessories.
2. Made of reinforced fiberglass
3. Wide range of uses.
The product is sharp and sturdy and is suitable for cutting metals, gems, glass, ceramics, porcelain and ceramic tiles.
Note: As the rotary tool metal cutting disc wheel will break under a extreme pressure, for your safety, please must wear gloves and goggles when using diamond cutting wheel.
Ravi H. Radheshwar
September 2, 2025
Considering how cheap the cutoff wheels are, I was pleasantly surprised by how much better these are than the red, brittle name-brand ones sold at big box stores.I needed to cut a 6-inch square out of a steel computer case for extra ventilation. I tried using the red cutoff wheels that came with my rotary tool, but they took ages to do anything, and they either completely wore away after barely scratching the steel, or they snagged on burrs and shattered. They were completely useless.But with just one of these fiberglass-reinforced ones I was able to cut out the entire square quickly and cleanly, and it had only lost a couple millimeters of diameter in the process, so it’s got plenty of life left. And since this is a 60-pack, I basically have a lifetime supply of cutoff wheels.
JMB
August 14, 2025
I installed “non-climb horse fencing†against white plastic fencing all along the front of my property. Originally, I connected it to the fence with large white plastic ties (so the color would blend in). After a few years, the sun deteriorated the zip ties and they began breaking off. For a while I replaced the broken ones with more plastic ties but eventually gave up. I found stainless steel zip ties, but being too short, I had to connect two together to reach around the fencing. That left quite a bit hanging loose after tightening them. The SS zip ties held great, but we’re so tough (and slick) that even good cutters wouldn’t work. I used a 4 1/2 inch cut off wheel at first, but that was too easy to damage the wire. I dreaded trying my usual “Dremel†brand cut off disks, because I have never had any luck with them lasting! I decided to order this 60 pack on Amazon, hoping I would have plenty to finish the job (Dremel brand would have been way too expensive).I mounted the first cutting disk on one of the spindles supplied in the pack. They have two tiny washers to hold the disks which were a little delicate to install. After chucking into my “Milwaukee†brand (Dremel style) cutting tool, I noticed the disk didn’t seem to be running perfectly true, but I decided to try it anyway-after all, I had 59 more in the pack😊. Wheel, I cut off over 250 stainless steel zip ties with that first disk and could have cut a lot more. My cut off tool had to cool off a few times, but the disk didn’t wear out or break. In the photo, I am holding a new disk beside the original one I installed and used in the tool. I know they wouldn’t last so long if used on thick metal, but my aviation snips nor wire nippers would cut these ties. Definitely worth the money, and I highly recommend!
Siegfried A.
August 13, 2025
I use these for RC hobby they work great, easy to set up, looks nice and thick, cuts great and clean have used on plastic and metal. I have only used 1 so far
David
July 28, 2025
Great vaue!
Robinson
June 21, 2025
nice kitworks wellgood price
Tristan
June 17, 2025
Cut a small steel bracket off on a quad, i thought I'd be changing disks often. But one disk did the whole job. This kit should last a long time.
Don
June 10, 2025
I have bought a few different kind of Wheels, of which none of them can compare to these they're just the best! Modify the 36x 24x 30 dog cage, built it into a cage box did some welding a fair amount of cutting and grinding one blade did it all! The Dremel with a cut off wheel is a standard tool I use almost daily fabulous wheel!
Frank Westbrook
June 9, 2025
Great bargain. ðŸ‘
Barry B
May 6, 2025
Perfect for trades. Not flimsy at all stable.Used with corded 4300 Dremel down to a cordless Dremel lite.
Dexou
March 4, 2025
I bought those after running out of the brand name version. They are not as long lasting as the other one but the difference in price makes up for it.
david
February 19, 2025
If you are lucky one will get a small job done maybe. If you aren't you might go through 3-4. For the price they work, not sure how safe it is. I might have been lucky so far or its harmless when they explode
Recommended Products
